The JBL Studio 620 is a compact two-way bookshelf loudspeaker of the Studio 6 series, sold in pairs in Wood or Dark Wood. JBL introduced the Studio 6 range in 2018 and 2019. It comprises the 698, 690 and 680 floorstanding speakers, the 630 and 620 bookshelf models, the 610 wall-mountable surround speaker, the 665C and 625C centre speakers and the 650P and 660P powered subwoofers. In this range the 620 is the smaller bookshelf model, below the 630.
Key specs that matter
Bass comes from a 133 mm PolyPlas low-frequency woofer. Above it, the JBL 2414H-1 25 mm compression driver is mated to an HDI waveguide. Crossover frequency is 2.3 kHz. Frequency response is 50 Hz - 40 kHz. Sensitivity is 84 dB (2.83 V/1 m), nominal impedance is 6 ohms and recommended amplifier power is 100 W maximum. Each speaker measures 190 x 240 x 312 mm (W x D x H) and weighs 6.88 kg.
Engineering and use context
Every passive Studio 6 model uses a compression driver on an HDI waveguide. Its enclosure is bass reflex via a rear-firing tuned port. The grille is magnetically attached and comes off by pulling it away from the enclosure.
Gold-plated connectors on the rear accept bare wire, pin, spade and banana connectors. Two sets of input connectors joined by jumper bars, for bi-wiring, are reserved for the 698, 690 and 680. Within the series, only the Studio 610 is designed for wall mounting. Each box holds two speakers, an owner's manual, a warranty card and eight feet pads. Country of origin is Indonesia.
Pairing
An amplifier rated for 6 ohm loads is required. The single set of terminals is for single-wire connection. Matching centre speakers are the Studio 625C and 665C, and matching subwoofers are the Studio 650P and 660P.
Alternatives
The JBL Studio 630 is the larger bookshelf model of the Studio 6 series, with a 165 mm PolyPlas woofer and the same 25 mm compression driver.