Hifiverse

Bookshelf Speakers - Tangent Acoustics Spectrum II X5

Description, images, technical data and specifications

Tangent Acoustics Spectrum II X5
Image source - (c) Tangent Acoustics

The Spectrum II X5 is a two-way bass-reflex bookshelf loudspeaker from Tangent, a loudspeaker brand of Danish design. Tangent presents it as a development of the Spectrum II X4, with a larger mid-woofer and higher sensitivity. Within the Spectrum II series it sits above the X4 and below the X6 floorstanding speaker. Finishes are Black (product code TANSPE2X5BK) and White (TANSPE2X5WT).

Key specs that matter

Frequency response is 60 Hz - 20 kHz (±3 dB). Sensitivity is 88 dB (1 W/1 m) and nominal impedance is 6 ohms. Power handling is 60 W RMS with a 100 W peak, and the recommended amplifier power is 20 - 100 W. Dimensions are 166 x 322 x 205 mm (W x H x D), and net weight is 4.3 kg per speaker.

Engineering and use context

A 1-inch (25 mm) dome tweeter and a 5-inch cellulose pulp mid-woofer make up the driver complement. Tangent specifies a crossover point of 2800 Hz with 12 dB / 12 dB slopes, second-order on each side.

Since 2026 the same cabinet and drivers are also offered as the Spectrum II X5 Active BT. This version has a built-in 2 x 50 W class D amplifier and inputs for Bluetooth 5.3 aptX HD, Hi-Res USB audio, RCA line, MM phono, optical and coaxial digital and HDMI ARC. Frequency response, crossover point and sensitivity are unchanged, and signal-to-noise ratio is above 90 dB (A). It adds a subwoofer output (20 - 120 Hz), a remote control and automatic standby after 15 minutes without a signal, and the active speaker weighs 5.1 kg.

Pairing

An amplifier rated for 6 ohm loads within Tangent's recommended power range is required. The series subwoofer is the Spectrum II XSW8.

Alternatives

The Spectrum II X4 is the smaller bookshelf model in the series, with a 4-inch mid-woofer, 87 dB sensitivity, a response down to 65 Hz and a 145 x 256 x 198 mm cabinet weighing 3.5 kg.

Specifications