The Q10 is a two-way stand-mount loudspeaker from Guru Audio of Sweden. Guru originally designed it for professional use as a monitor, under the name QM10, for Quality Manager. The company was founded in 2007 by violinist Erik Ring, industrial designer Erik Espmark and acoustic engineer Ingvar Öhman, who had worked with Stig Carlsson, and its loudspeakers are made by hand in the EU. Finishes are White, Ocean Grey and Black.
Key specs that matter
Typical in-room response is 30 Hz - 30 kHz. Sensitivity is 87 dB (2.83 V, 1 m), and nominal impedance is 5 ohms. Its crossover band is 2 - 7 kHz. Recommended amplifier power is 20 - 160 W. Drivers are a 19 mm soft dome tweeter and a 102 mm mineral fibre cone mid/woofer. Enclosure type is a Helmholtz resonator, in MDF and aluminium. Dimensions are 300 x 232 x 252 mm (W x H x D). Placement is on a bookshelf or a stand.
Engineering and use context
Guru attributes the bass extension of the 102 mm driver to its long, linear stroke and a pressure factor more than three times that of a typical 15 in driver. This mid/woofer is the Guru B59mf, and Guru states that its mineral fibre membrane has controlled behaviour across its whole working range and adds part of the stereo system compensation above its nominal band.
Guru Audio bases its designs on ordinary rooms and on human hearing rather than on anechoic measurements. Here the frequency response is adapted to include the sound reflected from the rear wall and the floor, and a bass roll-off is built in as the inverse of the boundary gain. Guru states that this principle provides reinforcement in the lower bass range. For the second principle, which Guru calls mending stereo, the design target is an adjusted response curve, so that the sum of the direct sound at each ear and the later sound from the opposite speaker reads as flat.
Pairing
An amplifier designed for 4 to 8 ohm loads is required. The matching stand is the Standpoint Q10, an accessory from Guru.
Alternatives
The Guru 12 is the larger Guru stand-mount, with a 125 mm polypropene cone mid/woofer in an MDF and steel Helmholtz resonator enclosure.