The PMC8-2 is an active three-way nearfield reference monitor with ATL bass loading from PMC, The Professional Monitor Company of the UK. PMC designed it for critical reference monitoring in demanding environments, including large-scale scoring sessions, post-production and mastering suites. It is a larger-cabinet companion to the PMC6-2 in the same studio range, and Studio black is the only finish.
Key specs that matter
The drive unit complement is two PMC 200 mm (8-inch) studio 8 bass drivers, a PMC55 55 mm (2-inch) soft-dome midrange and a PMC 27 mm (1-inch) soft-dome tweeter. Effective ATL length is 3 m. Amplifier power is 400 W rms per channel, with two channels for the bass drivers and one each for the midrange and the tweeter. Frequency response is 25 Hz - 25 kHz (-3 dB, 1 m, full space, on-axis). Sensitivity is 98 dB SPL at 1 m for a +4 dBu input signal. Maximum continuous SPL is 113 dB at 1 m and maximum peak SPL is 125 dB at 1 m (half-space values). Directivity is ±45 degrees horizontal and ±50 degrees vertical (-6 dB off axis at 10 kHz). Latency is 2.4 ms. Cabinet dimensions are 534 x 551 x 440 mm (H x W x D), and weight is 39 kg.
Engineering and use context
Its twin 8-inch long-throw bass drivers are loaded by a precisely tuned ATL cabinet that terminates in hexagonal Laminair vents. The PMC55 midrange, the tweeter, the DSP system and the four channels of Class-D amplification are shared with the PMC6-2.
A single XLR input is switchable between analogue and digital AES3. In analogue mode the maximum input level is selectable at +20 or +24 dBu, with 22 kohm input impedance. The digital input accepts 16/24-bit AES3 at 18 - 192 kHz (left, right or left + right) with 110 ohm impedance, and an XLR digital AES3 output runs at a fixed 24-bit/96 kHz. An expansion card slot is reserved for future connectivity upgrades.
Each monitor is configurable directly via the rear panel or with PMC's browser-based SoundAlign software over an RJ45 network port. Available settings are level trim (±10 dB), a high-pass filter (20 - 200 Hz, 12 dB per octave), delay (0 - 30 ms), phase, LF and HF shelving filters, a five-band parametric EQ and three user presets. Mains input is 100 - 240 V AC auto-switching.
Pairing
A balanced line-level or AES3 source is required, such as an audio interface, a monitor controller or a preamplifier with balanced outputs. PMC states that its consistent dispersion allows it to be combined with smaller PMC speakers in multichannel systems. The matching subwoofer is the PMC8-2 SUB, and together they form the XBD system with 6 dB more bass headroom. Dedicated stands are available for both versions.
Alternatives
The PMC6-2 is the smaller active three-way monitor in the same PMC studio range.