Hifiverse

Bookshelf Speakers - Wilson Benesch P1.0

Description, images, technical data and specifications

Wilson Benesch P1.0
Image source - (c) Wilson Benesch

The P1.0 is the standmount loudspeaker that opened the Precision Series of Wilson Benesch, the Sheffield company that makes its own enclosures and drive units. As the entry point into the series, it brought technology from the Geometry Series into a smaller design with an integrated stand. The series also includes the P2.0 and P3.0 floorstanding models, and Wilson Benesch now lists all three as legacy products.

Key specs that matter

Drive units are a 170 mm (7 in.) Wilson Benesch Tactic 2.0 mid/bass and a 25 mm (1 in.) Wilson Benesch Leonardo silk dome tweeter. The mid/bass is directly amplifier coupled, and the tweeter has a second-order 5 kHz high-pass filter. Nominal impedance is 6 ohms (min. 4 ohms). Sensitivity is 89 dB (1 m on axis, 2.83 V input). Frequency response is 38 Hz - 24 kHz (±2 dB). Height is 322 mm for the cabinet and 1025 mm with the stand. Width is 205 mm at the baffle and 348 mm at the widest point of the foot, and depth is 368 mm. Weight with the integrated stand is 30 kg. Terminals are single-wired and sit on the rear of the enclosure, not the stand, and each channel has four M14 spikes with 1.5 pitch.

Engineering and use context

Wilson Benesch built the first iteration of its own dynamic drive unit in 2002. It was the first company to develop a consumer product using isotactic polypropylene, a material it chose for its balance of high specific stiffness and damping. On the P1.0 the crossover design is minimal, with no crossover components between the amplifier and the Tactic 2.0. The Leonardo tweeter sits in a sealed enclosure behind a decoupled polymer-carbon fibre faceplate. This faceplate is manufactured in-house and also acts as a waveguide.

Its enclosure is a hybrid construction of aluminium, birch plywood, steel and high-density compressed paper. Top and bottom caps are CNC-machined from solid aluminium billets. Along the vertical axis, U-section high-torsion 13 mm steel tie bars compress and brace the whole structure, and tubular cross bracing with damping is used in the horizontal axis. Baffle, rear enclosure, top plate and bottom plate are all aluminium and tied together with steel bar.

Rather than a separate support, the stand is tied directly into the aluminium base plate of the enclosure at one end and into the stand foot at the other. Steel ties connect the mass of the enclosure to the mass of the foot. Finishes come in colour, textured, earth and wood effect groups, including Precision Black, Precision White, Silver Birch, Aged Oak, Aged Walnut and Burr Walnut.

Pairing

An amplifier stable into the quoted minimum impedance is required. The single-wire terminals take one speaker cable per channel.

Alternatives

The Endeavour 3Zero is a standmount loudspeaker of the current Wilson Benesch Fibonacci Series.

Specifications

  • Model name

    P1.0

  • Frequency Response low +/- 3dB (Hz)

    38

  • Frequency Response high +/- 3dB (Hz)

    24 000

  • Sensitivity (dB at 1 W/1m)

    89

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    32.2 × 20.5 × 3.8

  • Weight (kg)

    30

  • Official link