Hifiverse

Bookshelf Speakers - Palmer ORBIT 11

Description, images, technical data and specifications

Palmer ORBIT 11
Image source - (c) Palmer

The ORBIT 11 is an active coaxial three-way studio monitor from Palmer, the German pro-audio brand of the Adam Hall Group in Neu-Anspach. Palmer announced it on 10 February 2026 at a UK price of GBP 799 including VAT, for mixing, mastering, post-production, sound design, broadcast and content creation. It is available in black or white and is the only model in the ORBIT series.

Key specs that matter

Drive units are a 165 mm (6.5 in) ferrite midrange with a 51 mm voice coil, a coaxially mounted 25 mm (1 in) neodymium tweeter and two 203 mm (8 in) ferrite woofers with 38 mm voice coils. Crossover frequencies are 250 Hz and 1.8 kHz. Class D amplification is rated at 400 W RMS (LF 320 W, MF 40 W, HF 40 W) and 1,000 W peak (LF 500 W, MF 250 W, HF 250 W). Frequency response is 28 Hz - 28 kHz (-3 dB). Maximum SPL is 116 dB peak (sine burst, full space, 1 m, THD ≤3%). Dispersion is 120° x 120°. Each monitor measures 217 x 293 x 292 mm (W x H x D) and weighs 13.9 kg.

Engineering and use context

Palmer calls the coaxial arrangement a True Point Source, with the midrange driver and the tweeter on a single acoustic axis. A cardioid front baffle reduces rearward energy. Both woofers are impulse-compensated and sit in a sealed die-cast aluminium enclosure with walls 5 to 16 mm thick, designed to counteract mechanical forces and minimise cabinet vibration.

Internal processing runs at 96 kHz/24-bit with FIR filtering for linear-phase behaviour, at a system latency of 4 ms. THD+N is 0.01% (1 kHz, +4 dBu). On the top-mounted control panel are the input pad, a three-band EQ, Desk and Rear Wall presets and an 80 Hz high-pass filter. Limiter, multiband limiter and overheating protection are built in. Power comes from a 100-240 V switched-mode supply rated at 250 W, with an IEC C14 socket and convection cooling. For wall or ceiling installation there are four M6 threaded mounting points and an M8 eye-bolt point for a safety attachment.

Pairing

The balanced XLR line input (0 dBu nominal sensitivity, 10 kohm, 22 dBu clipping) accepts a monitor controller, preamplifier or audio interface. An AES3 input on XLR takes a digital signal directly, and the AES3 Thru output passes it to a second monitor. The matching wall bracket is the Gravity GSPWMBS20B tilt-and-swivel mount.

Alternatives

The Palmer STUDIMON 5 is the smaller active nearfield monitor in the Palmer range.

Specifications