Hifiverse

Bookshelf Speakers - KLH Model Three

Description, images, technical data and specifications

KLH Model Three
Image source - (c) KLH

The Model Three is a two-way acoustic suspension bookshelf loudspeaker from KLH Audio of the USA, and the only bookshelf model in the current Model collection alongside the Model Four, Five and Seven floorstanding speakers. Henry Kloss, one of the KLH co-founders, helped bring the acoustic suspension principle to market in 1954, and the KLH name dates from 1957. According to KLH, the Model Three borrows similar cabinet and driver construction from the Model Five. List price is USD 799.99 per speaker or USD 1,599.98 per pair, with a 10-year warranty.

Key specs that matter

Configuration is two-way in a sealed cabinet, with a 203 mm woofer and a 25 mm aluminium dome tweeter. Crossover frequency is around 1.6 kHz. Frequency response is 46 Hz - 20 kHz (±3 dB), with low-frequency extension to 35 Hz (-10 dB). In-room sensitivity is 88 dB, and nominal impedance is 6 ohms. Power handling is 150 W (600 W peak), and maximum in-room SPL is 108 dB. Horizontal dispersion is 140 degrees. Without the riser base each speaker measures 482 x 311 x 267 mm (H x W x D) and weighs 13.2 kg. On the included riser it is 718 mm high and 292 mm deep and weighs 16.4 kg.

Engineering and use context

Its woofer has a pulp-paper cone on a reverse-roll rubber suspension, a 38 mm flat-wire voice coil and a die-cast aluminium frame. The tweeter dome sits on a soft rubber suspension behind a machined aluminium faceplate. Thirteen components make up the crossover network, including iron-core inductors and Mylar capacitors. On the back of each speaker a three-position Acoustic Balance Control sets the level above 400 Hz to Hi (0 dB), Mid (-1.5 dB) or Lo (-3 dB) and leaves the bass unchanged.

KLH builds the enclosure from structurally reinforced 19 mm MDF, in a wide and shallow format with a wide front baffle. Real wood veneer is offered in English Walnut, West African Mahogany and Nordic Noir. Each finish comes with its own magnetic knit grille - Stonewash, Old World and Medici Grey respectively - and every grille is also sold separately. A slant riser base of matte black, powder-coated 14-gauge steel is supplied with every speaker and tilts it back by 8 degrees.

Pairing

The Model Three is a passive speaker, and an amplifier or receiver rated from 30 W per channel is required. KLH recommends 80 - 100 W per channel. Five-way binding posts on the back accept bare wire, banana plugs, pin connectors or spade connectors.

Alternatives

The Kendall 2B is an earlier KLH bookshelf speaker, a two-way bass reflex design with a titanium dome tweeter, now listed as discontinued.

Specifications

  • Model name

    Model Three

  • Frequency Response low +/- 3dB (Hz)

    46

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    30 – 150

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    31.1 x 48.3 x 26.7

  • Weight (kg)

    16.4 (with stand)

  • Official link