Hifiverse

Bookshelf Speakers — Shinjitsu Audio Hiro

Description, images, technical data and specifications

Shinjitsu Audio Hiro
Image source - (c) Shinjitsu Audio

Hiro is a two-way horn loudspeaker from Shinjitsu Audio, a small workshop in Arizona that builds every pair to order. In a line-up of three complete systems it is the middle model, above the compact Atom and below the Magnum, and Shinjitsu intends it for medium-sized listening rooms. Each pair is assembled, voiced, tested and packed by hand, the build time is six to eight weeks, and the price is USD 4,000 per pair.

Key specs that matter

Above the crossover, a Beyma CD171Fe/PK compression driver is loaded by a 305 mm ME45 constant-directivity horn. Below it sits a Markaudio CHR 120 extended-range woofer, available with a copper or a silver cone. Frequency response is 40 Hz - 20 kHz. Sensitivity is 93 - 94 dB, with the exact value set by the resistor chosen for the horn circuit, and nominal impedance is 8 ohms. Each speaker measures approximately 1,020 x 240 x 460 mm (H x W x D). Shinjitsu specifies amplifiers from 8 W upward and gives no upper limit.

Engineering and use context

Horn, compression driver and crossover form a separate module that Shinjitsu calls Horn X2. It stands on a hardwood plinth on top of the bass cabinet, and according to the maker this keeps these parts out of the cabinet's vibration and internal air pressure. Inside the module is the Continuum crossover, a proprietary network intended to make horn and woofer act as one source. It comes with sets of resistors and capacitors, so the owner can alter horn level and crossover slope. With only two drivers, the midband is not divided across several crossover points.

Cabinets are made of Baltic birch plywood with solid hardwood faces. Walnut, oak and cherry are the standard woods, and Arizona rosewood, acacia and wenge cost USD 200 extra. Every piece of wood is selected individually, so grain and colour vary slightly from pair to pair.

Pairing

Single-ended triode amplifiers such as 300B designs, push-pull tube amplifiers, class A transistor amplifiers and conventional integrated amplifiers are all on the maker's list of partners. Speaker cables are not supplied with the pair.

Alternatives

The Shinjitsu Atom is the compact loudspeaker of the range, a cabinet about 510 mm high with a 152 mm B&C ME20 horn, the same Beyma compression driver, a Markaudio CHR-70 woofer and a price of USD 1,495 per pair.

Specifications

  • Model name

    Hiro

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    93

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    102 x 24 x 46

  • Weight (kg)

    22.68

  • Official link

Related content