The Elegan 1 is the compact model of the Elegan Series from QUAD, a two-way bookshelf speaker designed from the ground up for the range. It was announced in July 2026 and went on sale on 24 July at GBP 749 per pair in the UK and USD 995 per pair in the USA. Above it sits the three-way Elegan 2 floorstanding speaker at GBP 1,499 per pair. QUAD lists the Elegan 1 next to its QUAD 33 preamplifier, QUAD 303 power amplifier and Platina Integrated.
Key specs that matter
This is a two-way bass reflex design with a 165 mm woven Kevlar cone bass/midrange driver and a 25 mm soft dome tweeter. Crossover frequency is 2.9 kHz. Frequency response is 56 Hz - 24 kHz (±3 dB), and bass extension is 44 Hz (-6 dB). Sensitivity is 86 dB (2.83 V/1 m). Nominal impedance is 8 ohms (min. 4.3 ohms). Recommended amplifier power is 30 - 150 W, and peak SPL is 102 dB. Cabinet volume is 15.5 litres. Dimensions are 365 x 220 x 333 mm (H x W x D), height on plinth and depth with terminals and grille (300 mm cabinet plus 33 mm), and net weight is 8.9 kg per speaker.
Engineering and use context
QUAD developed the woven Kevlar driver to combine low mass with increased rigidity and controlled self-damping. Its 25 mm tweeter is integrated within a precision waveguide, which according to QUAD controls dispersion.
Inside, the high-density MDF cabinet is reinforced with strategically positioned internal bracing to minimise resonance. At the rear sits QUAD's Airflow bass reflex system, with a precision-profiled port to reduce turbulence. Each speaker has one pair of screw terminals, which accept bare wire or spade connectors. Finish options are real wood Walnut veneer and Matte Black, and protective feet are supplied as standard. Both Elegan models share the 165 mm woven Kevlar cone and the 25 mm soft dome. The Elegan 2 uses two of these bass drivers plus a 125 mm woven Kevlar midrange, crossed over at 480 Hz and 2.7 kHz.
Pairing
An amplifier stable into 4 ohms is required. Matching QUAD electronics are the QUAD 33 preamplifier with the QUAD 303 power amplifier, or the Platina Integrated. The terminals take a single run of speaker cable per channel.
Alternatives
The Revela 1 is QUAD's other two-way bookshelf speaker, with a 165 mm advanced fibre cone and a 27 x 60 mm true ribbon tweeter.