The DSM-15 is a two-way stand-mounted loudspeaker from Duntech Audio Pty Ltd of Lugarno, New South Wales, Australia. Duntech traces its origins to John Dunlavy, whose first company, Audio Standards, started in Texas. It is offered next to the Senator, Marquis, Princess and Sovereign, and comes with its own dedicated stand. Duntech allocated driver selection, cabinet design and crossover design to specialists in each field.
Key specs that matter
Frequency response is 55 Hz - 35 kHz (±1.5 dB), with the -3 dB point at 42 Hz, measured at 3.5 m on the tweeter axis. Efficiency is 89 dB SPL at 1 W (2.83 V/1 m). Nominal impedance is 4 ohms. Power rating is 500 W peak for 10 µs, and the recommended amplifier power is a minimum of 60 W RMS per channel. Pulse coherency factor, the propagation time error at 3.5 m on the tweeter axis, is below 10 µs. Drivers are a 150 mm polypropylene bass unit and a 25 mm silk concentric tweeter. Size including stand is 1120 x 250 x 400 mm (H x W x D). Packed weight is 25 kg per pair of speakers and 25 kg per stand.
Engineering and use context
Its crossover is two-way first-order, described in the Duntech brochure as quasi first-order. Enclosure type is rear-vented. Custom birch plywood and solid American walnut make up the entire cabinet, and American walnut is the finish. The dedicated stand has a granite foot and is sand-fillable.
Duntech's measurement work covers frequency and phase response, time alignment, crossover network properties and diffraction. For the DSM-15, all crossover parts are individually tested and matched in pairs for the left and right speaker within a 2% tolerance. Each crossover is tested before assembly into the loudspeaker, and both speakers are then tested until they are matched as a stereo pair. Finally every loudspeaker is played for several hours so that the driver surround and spider come closer to compliance, and each one is re-measured before approval for packing.
Pairing
An amplifier stable into 4 ohms is required. Input terminals are pure copper, gold and silver plated, and accept banana or spade connectors. Bi-wiring is not supported.
Alternatives
Duntech has no other stand-mounted model, since the Senator, Marquis, Princess and Sovereign are larger models.