Hifiverse

Bookshelf Speakers — ELAC Debut ConneX Adsum DCB41-DS

Description, images, technical data and specifications

ELAC Debut ConneX Adsum DCB41-DS
Image source - (c) ELAC

The DCB41-DS is the Designer Series edition of the ELAC Debut ConneX DCB41 powered speaker pair, made in collaboration with Adsum, the menswear label Peter Macnee started in Brooklyn, New York, in 2015. ELAC sells it as the Debut ConneX Adsum, and the model was presented at High End 2024 in Munich. The complete system was priced at EUR 649, which is EUR 120 above the regular DCB41. Two variants are listed, White and Black.

Key specs that matter

Each speaker is a bass reflex design with a 115 mm polypropylene woofer and a 19 mm soft dome tweeter. Amplifier power is 2 x 50 W. ELAC quotes a frequency response of 66 Hz - 25 kHz (anechoic) and 50 Hz - 25 kHz (in-room), THD of 0.20% or less, a signal-to-noise ratio of 90 dB or more and a maximum system output of 102 dB at 1 m. Inputs are HDMI (ARC), a switchable line/phono input, USB Audio (96 kHz/24-bit), optical and Bluetooth (aptX). Outputs are a speaker output for the passive speaker and a subwoofer output. Mains voltage is 120 - 240 V, and dimensions are 140 x 247 x 170 mm (W x H x D).

Engineering and use context

ELAC uses a long excursion woofer with a wide-rolled surround, and the tweeter sits in a custom waveguide that ELAC says improves dispersion and directivity. Cabinets are made of 12 mm reinforced MDF. ELAC directs the bass reflex port to the rear in an S configuration for better low frequency extension and lower ventilation noise. XBass is ELAC's proprietary circuit for low frequency output, and it can be turned off when a subwoofer is connected.

On the rear panel are the volume knob, which also changes input and switches the unit on, a Phono/Line switch, an L/R switch and a USB port for firmware updates. A front LED shows the input by colour, blue for Bluetooth, green for HDMI, white for USB, red for optical and pink for phono. With no use for 15 minutes the system goes into standby. Over HDMI ARC the TV remote can control power, mute and volume, and the supplied infrared remote also sets XBass and LED intensity. Two stands, four rubber feet and two removable grilles come in the box.

Pairing

A source is the only addition required. The phono input accepts a turntable without a built-in phono preamplifier. A powered subwoofer connects to the subwoofer output.

Alternatives

ELAC's standard Debut ConneX DCB41 is the same powered bookshelf pair without the Adsum styling.

Specifications

  • Model name

    Debut ConneX Adsum DCB41-DS

  • Frequency Response low +/- 3dB (Hz)

    66

  • Frequency Response high +/- 3dB (Hz)

    25 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    2 × 50

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components