Hifiverse

Bookshelf Speakers — ELAC Debut Reference DBR62

Description, images, technical data and specifications

ELAC Debut Reference DBR62
Image source - (c) ELAC

The Debut Reference DBR62 is a two-way bookshelf loudspeaker from ELAC of Kiel, Germany, designed by Andrew Jones as an upgraded version of the Debut 2.0 B6.2. Its public debut was at the Rocky Mountain Audio Fest of September 2019, with an estimated price of USD 499 per pair, and sales started in November 2019. Two finishes are offered - a walnut cabinet with a black baffle or an oak cabinet with a white baffle - and the tweed cloth grilles are held on by magnets.

Key specs that matter

The DBR62 is a bass reflex design with a 25 mm soft dome tweeter and a 165 mm aramid-fibre woofer. Crossover frequency is 2.2 kHz. Frequency response is 44 Hz - 35 kHz. Sensitivity is 86 dB (2.83 V/1 m), and nominal impedance is 6 ohms. Maximum power input is 120 W. Each speaker measures 359 x 208 x 275 mm (H x W x D) and weighs 8.2 kg.

Engineering and use context

Its cabinet is made of CARB2 rated MDF. A new full perimeter brace joins the top and the side panels. Bass reflex loading uses a new dual flared slot vent on the front baffle, and according to ELAC it gives lower noise and higher bass output.

On the woofer, ELAC uses a new cast chassis for improved stiffness, together with a custom aramid cone that has greater stiffness and damping. The tweeter has a newly developed waveguide, combined with a more open grille design in front of it. Connections are made through 5-way metal binding posts on the rear panel.

Compared with the Debut 2.0 B6.2, the DBR62 keeps the same driver sizes, crossover frequency and frequency response, while the bracing, port, woofer chassis and tweeter waveguide are new. Its sensitivity is 1 dB lower, and it is 16 mm shorter and 0.8 kg heavier than the B6.2.

Pairing

An amplifier rated for a 6 ohm load is required. The 5-way binding posts accept bare wire, spades and banana plugs. For a larger system, the matching floorstanding model is the DFR52 of the Debut Reference family.

Alternatives

The ELAC Debut 2.0 B6.2 is the standard-series bookshelf model with the same driver sizes in a Black Ash vinyl cabinet.

Specifications

  • Model name

    Debut Reference DBR62

  • Frequency Response low +/- 3dB (Hz)

    44

  • Frequency Response high +/- 3dB (Hz)

    35 000

  • Sensitivity (dB at 1 W/1m)

    86

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    120

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    35.9 × 20.8 × 27.5

  • Weight (kg)

    8.2

  • Official link

More components