Hifiverse

Bookshelf Speakers — ELAC Debut 2.0 DOW4.2

Description, images, technical data and specifications

ELAC Debut 2.0 DOW4.2
Image source - (c) ELAC

The Debut 2.0 DOW4.2 is a compact two-way on-wall loudspeaker from the Debut 2.0 series by ELAC, designed by Andrew Jones. ELAC intends the Debut OW4.2 for side or rear wall installation in a surround system where space is limited. Slim wall mounts are included with each speaker.

Key specs that matter

Design is two-way bass reflex. The 1-inch cloth dome tweeter is paired with a 4-inch woven aramid-fibre cone woofer with an oversized magnet, crossed over at 2,500 Hz. Frequency response is 70 Hz - 35 kHz, sensitivity is 87 dB (2.83 V/1 m), nominal impedance is 6 ohms and maximum power input is 80 W. Its cabinet is CARB2-rated MDF in Black Ash vinyl, with 5-way metal binding posts. Dimensions are 200 x 324 x 100 mm (W x H x D), and weight is 3.6 kg.

Engineering and use context

ELAC custom-designed the soft-dome tweeter for the Debut 2.0 speakers. It has a wide-roll surround and sits in a wide-dispersion waveguide. According to ELAC, this waveguide improves directivity control and eliminates the diffraction modes of a conventional box enclosure.

Aramid fibre is the woofer cone material in all Debut 2.0 speakers. For this series the shape of the woven aramid cone was revised for greater stiffness and damping than polypropylene or paper.

The thick MDF cabinet is internally braced for stiffness and strength against cabinet vibration, and its bass reflex port faces forward.

Pairing

An amplifier or AV receiver channel rated for a 6 ohm load is required. ELAC states that all Debut 2.0 models work with virtually all AV receivers and amplifiers. In a surround system the matching front speakers are the Debut 2.0 floorstanding and bookshelf models.

Alternatives

The Debut 2.0 B6.2 is a bookshelf speaker in the same ELAC series, with a 6.5-inch woven aramid-fibre woofer and dual flared ports.

Specifications

  • Model name

    Debut 2.0 DOW4.2

  • Frequency Response low +/- 3dB (Hz)

    70

  • Frequency Response high +/- 3dB (Hz)

    35 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    80

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    20.0 × 32.4 × 10.0

  • Weight (kg)

    3.6

  • Official link

More components