Hifiverse

Bookshelf Speakers - Piega COAX 411

Description, images, technical data and specifications

Piega COAX 411
Image source - (c) Piega

The Coax 411 is the bookshelf model of the Coax Gen2 series from Piega of Horgen, Switzerland, a company that has made its loudspeakers by hand since 1986. Piega presents it as the introduction to its coaxial range. It replaces the Coax 311 and has a larger cabinet that gives the woofer more volume. The cabinet shape is the work of Swiss designer Stephan Hürlemann.

Key specs that matter

Design is a 3-way system shelf speaker with one C112+ coaxial ribbon and one 160 mm UHQD woofer. Frequency response is 35 Hz - 50 kHz, sensitivity is 90 dB/W/m and impedance is 4 ohms. Recommended amplifier power is 20 - 200 W. Its cabinet is extruded aluminium with Tension Improve Module 2 (TIM2). Dimensions are 45 x 21 x 31 cm (H x W x D), and weight is 25 kg. Standard versions are brushed silver aluminium, brushed black anodised aluminium and white-lacquered aluminium, each with a matching grille cloth. Eight Coax Excellence colours are also offered - Blue Lagoon, Misty Green, Shiny Ash, Desert Gold, Bordeaux Red, Havanna Tobacco, Autumn Bronze and Alpine Stone.

Engineering and use context

In the C112+ coaxial ribbon the tweeter and the midrange driver are positioned point-symmetrically on one level. Piega states that this forms a point source whose position stays unchanged across a wider frequency range. For Gen2 the midrange foil received a new special coating that linearises its response in the lower transmission range, and the coax driver now covers the range from 450 Hz upwards. Extra cross-bracing and a central web carry an additional neodymium magnet above the tweeter for greater efficiency. Inside the driver, the magnetic rods are mechanically decoupled against micro-resonances in the magnetic field.

SEAS manufactures the UHQD woofer to Piega's specifications. Inside the one-piece extruded aluminium profile, the TIM2 module is put under tensile stress and positively connected to the cabinet walls to increase the rigidity of the construction, and viscoelastic damping foils suppress the remaining micro-resonances.

Pairing

An amplifier stable into 4 ohms is required. The matching centre speaker is the Coax Center 211. A dedicated Piega stand for the Coax 411 is available.

Alternatives

The Premium 301 Gen2 is Piega's smaller 2-way bookshelf speaker, with an RM 01-24 ribbon tweeter and a 140 mm FSD-M bass-midrange driver.

Specifications

  • Model name

    COAX 411

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    50 000

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    20 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    45 × 21 × 31

  • Weight (kg)

    25

  • Official link

Related content