The CAST is a 3-way active loudspeaker from Pitt & Giblin of Hobart, Tasmania, designed and manufactured in collaboration with Tom Fereday. Each speaker is made of four marine grade aluminium castings, all cast in Hobart, and it can be used as a single unit or in multiples. List price is AUD 14,025 including GST in Australia and AUD 12,750 excluding GST for export.
Key specs that matter
Drive units are a 44 mm (1.75 in.) titanium compression driver, four 100 mm (4 in.) poly midrange drivers and one 250 mm (10 in.) aluminium subwoofer. Amplification is Hypex nCore with DSP, rated at 100 W for HF, 100 W for MF and 125 W for LF. Frequency response is 35 Hz - 20 kHz. Analogue and digital inputs are provided, with auto input and auto on/off, and trim settings of -5 dB, 0 dB and +5 dB.
Engineering and use context
Body, waveguide, base and rear cover are all cast. The high frequency driver plays into a large circular waveguide, and its titanium diaphragm operates from 1 kHz to 20 kHz. This circular waveguide casting also forms the cubic framework of the cabinet. Behind it, the four midrange drivers are housed in a sealed plywood enclosure, and their output is vented in a controlled manner using absorptive materials and physical alignment. The main body provides the volume for the rear-firing subwoofer. Internal bracing and damping materials are used inside the castings.
A Hypex FusionAmp module, housed in the stand, is the 3-way digital amplifier and signal processing unit for all three acoustic elements. According to Pitt & Giblin, its DSP is used to re-align the 3-way geometry. Every external surface is honed and hot waxed, with no visible fixings.
Each loudspeaker requires mains power. A digital signal cable carries both left and right channels and can be daisy chained between speakers without signal degradation. Using the Select button on the rear, each unit is set to play L, R or L+R. Short presses on Select cycle through these trim settings as volume profiles P1, P2 and P3. A red Protect light warns when the amplifiers are running out of power.
Pairing
No external amplifier is required. A streamer or other source connects to the analogue or digital inputs of the amplifier module. A single or centre unit is set to L+R.
Alternatives
The Superwax Mini is the other active model from Pitt & Giblin, a large-format 2-way with a 15-inch bass driver and Hypex nCore amplification.