Hifiverse

Bookshelf Speakers — PS Audio Aspen FR5

Description, images, technical data and specifications

PS Audio Aspen FR5
Image source - (c) PS Audio

The Aspen FR5 is a two-way stand-mount loudspeaker from PS Audio and the smallest model of the Aspen series, which runs from the FR30 through the FR20 and FR10 to the FR5. PS Audio describes it as a full-range 2-way system for small to medium-sized rooms. It uses the same Aspen planar tweeter as the FR20 and FR30. Industrial design is by Studio 63. The speaker is sold in pairs, with or without matching stands, in Satin Black or Satin White.

Key specs that matter

It is a passive radiator design with one 2.5-inch planar magnetic tweeter, one 6.5-inch woofer and one rear-firing 6 x 9-inch oval passive radiator. The crossover point is 1750 Hz with Linkwitz-Riley 6th-order acoustic slopes. Frequency response is 35 Hz - 20 kHz (-6 dB, half space), with 30 Hz (-6 dB) in-room. Sensitivity is 83.5 dB (2.83 V/1 m). Nominal impedance is 6 ohms (5.6 ohms minimum). Recommended amplifier power is 50 - 150 W. Each speaker measures 14.5 x 8 x 13 in. (H x W x D), or 368 x 203 x 330 mm, and weighs 12.1 kg. The stand is 28.25 x 11.75 x 14 in. and weighs 6.2 kg.

Engineering and use context

PS Audio developed its own drivers for the FR5. The planar magnetic tweeter has a Teonex diaphragm, directly driven and of ultra-low mass, between front and rear magnetic structures in a symmetrical push-pull neodymium motor arrangement. Below it is a long-throw, high-excursion woofer with a cast frame and a Curv cone of woven, self-reinforced polypropylene. Its motor has a split magnetic gap and a double copper Faraday ring for low, linear inductance, plus a single progressive Nomex spider with stitched-in lead wires.

The passive radiator is a high-compliance type, used instead of a port. Custom film capacitors and air-core inductors are used in the crossover.

The main body and internal baffling are MDF, with constrained-layer damped internal bracing. A sculpted front baffle of thermoset fiberglass resin composite carries integrated high-frequency acoustic waveguides. It is mounted from the rear of the cabinet with 13-inch shoulder screws, holding the cabinet in compression. Seven coats of lacquer give a satin finish, and the grilles attach magnetically.

Pairing

An amplifier within PS Audio's recommended power range is required. The matching stands are PS Audio's own Aspen FR5 stands.

Alternatives

The Aspen FR10 is the smallest floorstanding loudspeaker of the series, with a ribbon tweeter, an 8-inch ribbon midrange and two 6.5-inch woofers.

Specifications

  • Model name

    Aspen FR5

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    83.5

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    50 - 150

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    36.8 × 20.3 × 33

  • Weight (kg)

    12.1

  • Official link