Hifiverse

Bookshelf Speakers - RossoFiorentino Arno 20

Description, images, technical data and specifications

RossoFiorentino Arno 20
Image source - (c) RossoFiorentino

The Arno 20 is a two-way stand-mounted loudspeaker from Rosso Fiorentino, the Italian company founded in Florence in 2006 by the electroacoustic designer Francesco Rubenni. Named after the river that flows through Florence, the Arno series also includes the Arno 40 and the Arno CC. Rosso Fiorentino uses La Sala del Rosso, a hall in Bisarno Castle near Florence, for recitals, recordings and listening tests. Its price is about USD 7,000 per pair.

Key specs that matter

It is a 2-way rear-ported stand-mounted system with a 28 mm silk dome neodymium tweeter and a 165 mm treated paper cone mid-woofer, crossed over at 1.7 kHz. Frequency response is 45 Hz - 25 kHz (±3 dB). Sensitivity is 87 dB SPL (2.83 V, 1 m), and nominal impedance is 8 ohms (minimum 4.8 ohms). Recommended amplifier power is 50 - 150 W into 8 ohms with an unclipped signal. Each speaker measures 413 x 220 x 342 mm (H x W x D) and weighs 16 kg net. On the S-A20 stand, height is 1145 mm and the plinth is 247 x 385 mm (W x D).

Engineering and use context

Rosso Fiorentino developed the mid-woofer with an Italian driver manufacturer, exclusively for the Arno speakers. Its treated paper diaphragm has a silky outer layer and a stiffer inner core. It uses a ferrite magnet and a large voice coil, and the reflex system is over-damped. The tweeter is derived from the one in the flagship Siena.

Cabinet walls are multiple solid layers of HDF, rubber and aluminium, using the constrained-layer damping method of the whole Arno series. Fibrous damping materials and air cushions inside absorb cabinet resonances. The drivers are housed in front panels milled from 8 mm aluminium sheet.

According to the company, the crossover was designed from scratch with parts from international manufacturers and in-house coils. Several types of filtering are combined for a resistive, stable impedance with small phase variations. Vented ports, spikes and counter-spikes are aluminium parts made in Italy. Its connectors are pure copper plated in gold and palladium, with an anodised aluminium bushing and friction lock.

Finishes are RF soft-touch black with black genuine leather on the front panel and side stripes. Side panels come in Glossy Black, Natural Walnut, genuine leather, carbon fibre or custom lacquer. The S-A20 stand is HDF in soft-touch paint, with a front compartment filled with marble microgranules, a rear cable channel and adjustable spikes, and the speaker can be screwed onto its top plate.

Pairing

An amplifier in the recommended power range that delivers an unclipped signal into 8 ohms is required. The matching stand is the S-A20.

Alternatives

The Pienza 2 is a smaller Rosso Fiorentino bookshelf speaker with a 133 mm mid-woofer, now listed among the legacy models.

Specifications

  • Model name

    Arno 20

  • Frequency Response low +/- 3dB (Hz)

    45

  • Frequency Response high +/- 3dB (Hz)

    25 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    50 - 150

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    41.3 × 22.0 × 34.2

  • Weight (kg)

    16

  • Official link