The AN-K is a compact two-way bookshelf loudspeaker from Audio Note (UK), with two drive units per cabinet. Audio Note describes it as relatively efficient and intended for its own low-powered tube amplifiers. Four versions are listed - AN-K/D, AN-K/LX, AN-K/SPe and AN-K/SPx SE. They differ in internal cable, inductors and cabinet material, while the drivers are the same across the range.
Key specs that matter
Driver complement is an 8-inch paper cone bass driver with a foam surround and a 3/4-inch dome tweeter, both with copper voice coils. Characteristic impedance is 6 ohms and sensitivity is 90 dB (1 W/1 m). Frequency response is 50 Hz - 20 kHz (±6 dB, in room). Minimum amplifier power is 7 W RMS per channel, and maximum amplifier power is 150 W (unclipped) RMS per channel. Each speaker measures 470 x 275 x 190 mm (H x W x D) and weighs 11 kg.
Engineering and use context
Its sealed cabinet is made entirely of Finnish birch ply on the LX, SPe and SPx SE versions. The AN-K/D uses chipboard and MDF with a real wood Black Ash veneer, and the other versions are finished in real wood veneers. Bracing and internal damping are kept to a minimum. Rather than suppressing cabinet resonances, Audio Note tailors the cabinet to place them in frequency bands where they support the drive units. A shallow cabinet with a wide baffle is designed for use close to room boundaries, where the nearby walls reinforce the bass.
Inside is a simple, essentially first-order, hardwired crossover with air-cored chokes and selected bipolar and polypropylene capacitors in copper foil or silver foil, depending on the version. Internal cabling is 99.99% pure copper Audio Note wire on the AN-K/D (AN-D) and AN-K/LX (AN-Lexus-LX), and 99.99% pure silver on the AN-K/SPe (AN-SPe) and AN-K/SPx SE (AN-SPx). The SPx SE also replaces the copper inductors with silver inductors.
According to Audio Note, a dynamic matching process brings each loudspeaker of a stereo pair to within 0.4 dB of a master curve and of its partner, and 100% of production is tested. The rear panel carries two pairs of binding posts for the HF and LF sections, joined by removable links.
Pairing
An amplifier rated between Audio Note's minimum and maximum power figures is required. With the links removed, the terminals allow bi-wiring or bi-amping with two stereo or four mono power amplifiers. The matching stand is the AN-J speaker stand, a four-leg steel stand sold separately and filled with lead shot and sand.
Alternatives
The AN-J is another bookshelf loudspeaker in Audio Note's AN speaker range.