Hifiverse

Bookshelf Speakers - Q-Acoustics 3030c

Description, images, technical data and specifications

Q-Acoustics 3030c
Image source - (c) Q-Acoustics

The Q Acoustics 3030c is a two-way standmount speaker and the larger standmount of the British company's 3000c series. This 3000c line builds on the 3000i series and comprises the 3010c bookshelf, the 3020c standmount, the 3030c, the 3050c floorstanding speaker and the 3090c centre channel. Compared with the 3000i, the c generation has no visible joints or bolts and a one-piece driver trim in satin nickel, or satin chrome on the white version.

Key specs that matter

Drive units are a 142 mm (5.5 in) bass unit and a 22 mm (0.9 in) treble unit, with a crossover frequency of 2.5 kHz. Frequency response is 48 Hz - 30 kHz (-6 dB). Sensitivity is 86.5 dB (1 m, 2.83 Vrms at 1 kHz). Nominal impedance is 6 ohms (min. 3.9 ohms), and recommended amplifier power is 25 - 90 W. Effective volume is 12.5 litres. Dimensions are 324 x 205 x 329 mm (H x W x D), and each speaker weighs 7.5 kg. Finishes are Pin Oak, Claro Walnut, Satin White and Satin Black.

Engineering and use context

On the mid/bass unit Q Acoustics uses the C3 (pronounced C-cubed) Continuous Curved Cone, first introduced in the 5000 series and the M40 powered speakers. Its single continuous curve profile combines the bass behaviour of a traditional straight conic cone with the high/mid-range frequency control of a flared cone. According to Q Acoustics, the profile gives wide dispersion and a well-controlled frequency response for smoother integration with the tweeter. Because the cone geometry requires high motor strength, substantial magnets are coupled to the voice coil. These large magnets keep the pole plate and yoke near saturation and reduce flux modulation and harmonic distortion.

Following the tweeter design principle of the Concept series, the high-frequency unit is hermetically sealed and mechanically isolated (floating) from the baffle. This isolation prevents pressure modulation from inside the cabinet and from the adjacent mid/bass driver. Its inner chamber is vented for lower distortion, and a lower crossover point is used.

P2P (Point to Point) bracing stiffens the parts of the enclosure that need it. Each pair comes with two speaker grilles, two foam bungs and an owner's manual.

Pairing

An amplifier stable into 4 ohms is required. Q Acoustics lists QED Reference XT40i and QED XT25 speaker cables as recommended partners. The matching stand is the Q Acoustics 3030FS.

Alternatives

The Q Acoustics 3020c is the smaller standmount speaker of the same 3000c series.

Specifications

More components