Hifiverse

Headphones - Thieaudio Valhalla

Description, images, technical data and specifications

Thieaudio Valhalla
Image source - (c) Thieaudio

The Valhalla is the flagship in-ear monitor from Thieaudio, with 19 balanced armature drivers per side in a grade 5 titanium shell. It succeeded the V16 Divinity at the top of the range and went on sale on 6 September 2025 at USD 1,999. Thieaudio puts its research and development at over two years, with engineers from several countries involved. Besides the default faceplate, two custom designs are offered.

Key specs that matter

Each earpiece holds four Sonion 38D1XJ007 subwoofers, ten Sonion E50DT0005 low-midrange drivers, four Knowles RDE 33729 mid-treble drivers and one Knowles WBFK 30095 ultra-treble tweeter. There is no dynamic driver in the design. A 4-way passive crossover works together with a 4-bore acoustic tubing system. Sensitivity is 103 dB at 1 kHz and impedance is 9 ohms at 1 kHz. Frequency response is 10 Hz - 44 kHz. Its shell is CNC-machined from grade 5 titanium.

Engineering and use context

Thieaudio calls its bass arrangement PBS, for Precision Bass System. The low-frequency drivers sit in a dedicated resonance chamber, developed over a year and tuned for a bass shelf up to 200 Hz. A diversion tube and a pressure relief vent target the range from 5 Hz to 20 Hz, and the vent also relieves pressure built up in the ear canal.

Instead of the first-order sections common in in-ear monitors, the crossover uses multiple second-order networks. Thieaudio also applies impedance neutralisation so that the response stays consistent regardless of the source.

The published target curve has a 10 dB bass shelf with a cutoff at 200 Hz, a 1 dB slope from 200 Hz to 800 Hz and an 8 dB pinna gain centred at 2.8 kHz, with ultra-treble output up to 40 kHz.

Every unit is handcrafted by a single engineer, and one pair takes a full day. Drivers are measured and hand-paired before assembly, and each finished unit passes three inspection stages - post-assembly testing, cosmetic checks and accessory verification.

Supplied with it is the EliteNoir Cable V2, with silver-plated copper conductors in Litz Type II construction, spiral shielding, black PVC insulation and aluminium hardware. Ear tips are included.

Pairing

The EliteNoir Cable V2 comes with interchangeable 3.5 mm single-ended and 4.4 mm balanced plugs. A source with a balanced 4.4 mm output is required for the 4.4 mm plug.

Alternatives

The Thieaudio V16 Divinity is the earlier flagship in-ear monitor that the Valhalla replaced.

Specifications

  • Model name

    Valhalla

  • Transducer principle

    Dynamic

  • Scheme

    Closed

  • Wearing style

    In-ear

  • Frequency response low +/- 10dB (Hz)

    5

  • Frequency response high +/- 10dB (Hz)

    40 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    N/A

  • Weight (g)

    N/A

  • Official link

Related content