The SR-L700MK2 is an electrostatic earspeaker from STAX of Japan and the new version of the SR-L700 in the advanced-Lambda series. STAX calls it a new-generation SR-Lambda with a newly designed enclosure. Compared with the first SR-L700, the MK2 adds a detachable cable and new genuine lamb leather earpads. US price through the authorised STAX reseller is USD 1,649.
Key specs that matter
Type is a push-pull open back oval electrostatic earspeaker headphone. Frequency response is 7 - 41,000 Hz. Electrostatic capacitance is 110 pF and impedance is 145 kOhm at 10 kHz, both including cable. Sound pressure sensitivity is 101 dB (100 V rms, 1 kHz), and maximum sound pressure is 118 dB at 400 Hz. Bias voltage is 580 V DC. Weight is approximately 0.36 kg without cable and 0.50 kg with cable.
Engineering and use context
Its diaphragm is the hand-selected thin-film diaphragm of the SR-009. On both sides of it sit fixed electrodes machined by three-layer stainless etching with heat diffusion. From the SR-009 STAX also takes the 10-click slider mechanism that sets the height of the head pad.
Each earpad is hand crafted, with genuine lamb leather on the part in direct skin contact and high-quality synthetic leather on the surrounding portion. The detachable 2.5 m cable that connects it to the energiser is a low-capacity wide cable of parallel 6-strand construction, and its core wires are silver-coated 6N (99.9999%) OFC. STAX uses this wide parallel format to lower cable capacitance.
Pairing
An electrostatic energiser supplying 580 V DC bias is required. A conventional headphone amplifier output cannot drive it. STAX energisers such as the SRM-D10 II, SRM-D50 and SRM-700S are offered alongside it.
Alternatives
The SR-X9000 is the STAX electrostatic earspeaker above it in the range.