The SONO S is a triple-driver hybrid in-ear monitor from Shanling, the Chinese maker of portable players, DACs and earphones, presented under the tagline Affordable Hi-Fi Sound. It keeps the triple-driver design of the original SONO, with two dynamic drivers and one balanced armature per side, and changes the dynamic drivers. It is Hi-Res Audio certified and comes in Grey and Silver.
Key specs that matter
Drivers are 2 dynamic drivers and 1 balanced armature driver per earphone. Impedance is 16 ohms and sensitivity is 103 ±3 dB. Frequency response is 20 Hz - 40 kHz. Weight is 8.3 g per earphone. The cable is a 4-core silver-plated copper design, 1.3 m long, with 0.78 mm 2-pin connectors and a 3.5 mm gold-plated plug.
Engineering and use context
Both dynamic drivers sit in a coaxial design. A 9.2 mm bass driver and a 6.8 mm mid driver each use a titanium-plated diaphragm. In the original SONO, Shanling used a bio-diaphragm for the bass driver and a liquid crystal diaphragm for the midrange. Shanling says the titanium plating on both gives higher uniformity between the drivers.
Each dynamic driver has a lightweight HCCAW voice coil, copper-clad aluminium wire according to Shanling's structure drawing. The coaxial pair is surrounded by a trio of magnets. Shanling quotes increased sensitivity for the low and midrange frequencies from this triple magnet design. A flexible polyurethane suspension is used on the bass driver.
Treble comes from a custom balanced armature driver, ordered to Shanling's own specification as a dedicated treble driver. Two swappable sound tuning nozzles are supplied, a balanced nozzle with a black ring and a bass nozzle with a red ring.
Shells are cast from zinc alloy, then CNC-engraved and hand-polished. The cable uses an industry-standard 0.78 mm 2-pin interchangeable design, with 4 x 32 strands of oxygen-free copper with silver plating and metal plug parts. Silver foil wire is wound around every two strands. In the box are the earphones with cable, five pairs of eartips, a carrying case, two sound tuning nozzles and a manual.
Pairing
A 3.5 mm single-ended headphone output is required with the supplied cable. The 0.78 mm 2-pin sockets accept aftermarket cables, including balanced versions.
Alternatives
The Shanling SONO is the original model of this in-ear monitor, with the same two dynamic and one balanced armature layout.