Hifiverse

Headphones - ASUS ROG Kithara

Description, images, technical data and specifications

ASUS ROG Kithara
Image source - (c) ASUS

The ROG Kithara is the first high-fidelity planar magnetic gaming headset from Republic of Gamers, the gaming sub-brand of ASUS. ROG developed it in partnership with HIFIMAN. ASUS announced the Kithara on 6 January 2026 at CES, with a US launch price of USD 299.99, and sales started in February 2026.

Key specs that matter

It is a wired, open-back, over-ear headset with 100 mm planar magnetic drivers. Impedance is 16 ohms, and frequency response is 8 Hz - 55 kHz. The boom microphone has a sensitivity of -36 dB and a frequency response of 20 Hz - 20 kHz. Weight is 420 g. The headset is black, does not fold and has no active noise cancellation. Two 1.8 m cables with dual 3.5 mm plugs at the headset end are included - a boom mic cable and a headphone cable with a 3-in-1 plug system (3.5 mm and 6.3 mm single-ended, 4.4 mm balanced).

Engineering and use context

The drivers are ROG-customised HIFIMAN planar magnetic units. For left-right consistency, ASUS pairs the drivers of each headset on the basis of identical frequency response, and every unit comes with a frequency response measurement card. In the open-back design, air and sound pass through the earcup.

Its microphone is an on-cable full-band MEMS boom mic. On a conventional 3.5 mm TRRS cable, audio and microphone signals share the same ground, and ASUS notes that this causes crosstalk. The Kithara boom mic cable keeps the signal channels separate. According to ASUS, the MEMS capsule has a higher SNR than traditional ECM (electret) microphones.

The headphone cable uses OFC conductors and swappable plugs, and a USB-C to dual 3.5 mm adapter is supplied. Construction combines a metal frame with a hinge design and an 8-way adjustable headband with memory foam leatherette padding. Two sets of ear cushions are included, one velour and one leatherette with mesh fabric. The box also holds a warranty booklet and a quick start guide, but no carry case.

Pairing

The 4.4 mm balanced plug requires a DAC or headphone amplifier with a 4.4 mm balanced output. Its 3.5 mm and 6.3 mm plugs connect to single-ended outputs. ASUS lists PC, Mac, PlayStation 4 and 5, Nintendo Switch, iPad, iOS and Android, and Xbox consoles through the 3.5 mm connection.

Alternatives

The ROG Delta II is a wireless gaming headset in the same ASUS ROG range.

Specifications

  • Model name

    ROG Kithara

  • Transducer principle

    Electostatic or Planar magnetic

  • Scheme

    Open

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    8

  • Frequency response high +/- 10dB (Hz)

    55 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    3.5mm, 4.4mm, 6.3mm

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    N/A

  • Weight (g)

    N/A

  • Official link

Related content