The Kima 2 Raven Teal is an in-ear monitor from DUNU with one dynamic driver per side, a new edition of the Kima 2 that DUNU announced on 16 January 2026. DUNU released the original Kima 2 in January 2025. According to the company, the Raven Teal is an internal upgrade inspired by its limited edition Vernus, together with a new, darker colour tone. Launch price was USD 109.99, the same as the original model.
Key specs that matter
Each earpiece has an external magnet dynamic driver with a next-generation DLC composite dome diaphragm. Impedance is 20 ohms. Sensitivity is 108 dB/mW at 1 kHz, or 125 dB/Vrms at 1 kHz. Frequency response is 5 Hz - 40 kHz, and THD is below 0.3% at 1 kHz. Shells are 316L stainless steel, and each earpiece weighs 10.5 g. Cable length is 1.2 m (±0.1 m), with 0.78 mm 2-pin connectors at the earpieces. Two plugs are included, a 4.4 mm TRRRS balanced and a 3.5 mm TRS single-ended.
Engineering and use context
Two changes separate the Raven Teal from the standard Kima 2. For the diaphragm DUNU uses an improved deposition process and states that the DLC layer is more uniform. The second is the magnetic circuit, identical to the high magnetic flux density circuit of the Falcon Ultra. Both earpieces are full metal cavities, and their surface is matte-textured in a dark teal, where the standard Kima 2 has a sandblasted finish.
Its cable is a four-core hybrid of monocrystalline copper and silver-plated monocrystalline copper under a shock-absorbing nylon coating. At the source end it uses the patented Q-Lock Mini interchangeable plug system, and both terminations are interchangeable on one cable. In the package are an acrylic display stand and a range of ear tips, including DUNU Candy and DUNU S&S types.
Pairing
The 4.4 mm balanced plug connects to players and DAC-amplifiers with a 4.4 mm balanced output, and the 3.5 mm plug to any standard headphone output. Its 0.78 mm 2-pin sockets accept other cables with the same connector.
Alternatives
The DUNU Falcon Ultra is a single dynamic driver in-ear monitor with a 10.7 mm second-generation ECLIPSE driver, 16 ohm impedance and MMCX connectors.