Hifiverse

Headphones - See Audio Kaguya 2

Description, images, technical data and specifications

See Audio Kaguya 2
Image source - (c) See Audio

The Kaguya 2 is a universal in-ear monitor from See Audio and the successor to the original Kaguya, which appeared about seven years earlier with four electrostatic and four balanced armature drivers. Its Japanese release was on 14 June 2025 at JPY 249,000, and international sellers list it at about USD 1,599.

Key specs that matter

Each earpiece holds nine drivers - one dynamic driver, four balanced armatures, two bone conduction drivers and two electrostatic drivers. Sensitivity is 110 dB (±1 dB), and impedance is 13 ohms (±1 ohm). Frequency response is 20 Hz - 20 kHz, with distortion of 1% or less at 1 kHz. Shells are made of resin, and each faceplate uses natural blue mica with three layers of gold foil. The detachable cable is silver-plated high-purity OCC copper, with 0.78 mm two-pin connectors at the earpiece end and a 4.4 mm Pentaconn balanced plug at the source end.

Engineering and use context

Four driver technologies are combined in one shell, and See Audio assigns each group its own range. According to See Audio, the dynamic driver covers the bass, the two bone conduction drivers reinforce the low midrange, the balanced armatures cover bass, midrange and treble, and the two electrostatic drivers extend the top octave.

Bone conduction drivers pass vibration through the shell into the ear instead of radiating into the sound bore through the nozzle. They add low-midrange output without taking space in the bore.

A six-way crossover, named the MOBIUS Cross Over System in the Japanese launch material, divides the signal between the four driver groups. It also aligns their phase, so that the outputs of drivers at different positions in the shell arrive in step.

Its resin shell is shaped for a universal fit and takes standard ear tips, with no ear impressions required. Through the two-pin connectors, the cable can be replaced or exchanged for one with a different plug.

Pairing

A player, DAC or headphone amplifier with a 4.4 mm balanced output is required for the supplied cable. With only a 3.5 mm output, an adapter or a cable with a single-ended plug is required.

Alternatives

The original See Audio Kaguya uses electrostatic and balanced armature drivers only, without the dynamic and bone conduction units of the newer model.

Specifications

  • Model name

    Kaguya 2

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    In-ear

  • Frequency response low +/- 10dB (Hz)

    N/A

  • Frequency response high +/- 10dB (Hz)

    N/A

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    Pentaconn 4.4 мм

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    N/A

  • Weight (g)

    N/A

  • Official link

    N/A

Related content