Hifiverse

Headphones - Austrian Audio Hi-X25BT

Description, images, technical data and specifications

Austrian Audio Hi-X25BT
Image source - (c) Austrian Audio

Austrian Audio's Hi-X25BT is a closed-back, over-ear Bluetooth headphone in the company's Hi-X range. Austrian Audio is based in Vienna and was set up by former AKG engineers. It lists the Hi-X25BT as professional wireless headphones that also play over a USB-C cable or an analogue jack cable, with an integrated microphone for phone and conference calls. Prices on the Austrian Audio site are USD 199, GBP 129.99 and EUR 149.95.

Key specs that matter

Frequency range is 12 Hz - 24 kHz. Sensitivity is 113 dB SPL/V and impedance is 25 ohms, with an input power rating of 150 mW. Bluetooth is version 5.0 with the A2DP, AVRCP, HSP and HFP profiles and the SBC codec. Run time is 30 hours from a built-in lithium polymer battery. Weight is 270 g without cable, and dimensions are 205 x 170 x 80 mm. A 1.4 m jack cable with 3.5 mm plugs, a 1.2 m USB-C cable and a USB-C to USB-A adapter are supplied.

Engineering and use context

Every Hi-X model uses Austrian Audio's 44 mm High Excursion driver with a ring magnet system. A copper-clad aluminium voice coil works with the ring magnet, and according to the company this pairing reduces membrane weight. Its stiff membrane damps resonance.

Three listening modes are available. In Bluetooth mode the headphone pairs with a phone, tablet or computer. Over the USB-C cable it plays as a digital audio device while charging, though the microphone is then unavailable. Plugged into the analogue jack cable it switches off its electronics and runs passively, and a 3.5 to 6.3 mm adapter is enclosed for professional audio gear. Capacitive touch controls on the right earcup set volume by sliding along a guide groove, and taps start, pause and skip tracks or answer calls. These controls work only in Bluetooth mode.

For transport the earcups turn backwards to lie flat or fold towards the head bow, and a pouch is included. Ear and bow pads are slow retention memory foam. The ear cushions are mounted with Torx T6 screws and can be exchanged with the Hi-XBCUK replacement kit.

Pairing

A Bluetooth source with the A2DP profile is required for wireless use. A computer with a USB-C or USB-A port connects for digital audio. A source with a 3.5 mm or 6.3 mm headphone output connects for analogue listening.

Alternatives

The Hi-X15 is the wired closed-back model of the Hi-X range, with High Excursion drivers and a weight of 225 g.

Specifications

  • Model name

    Hi-X25BT

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    12

  • Frequency response high +/- 10dB (Hz)

    24 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    113

  • Impedance (Ohm (1 kHz))

    25

  • Playback time (hours)

    N/A

  • Weight (g)

    270

  • Official link