Hifiverse

Headphones - BASN Audio Bsinger LUX

Description, images, technical data and specifications

BASN Audio Bsinger LUX
Image source - (c) BASN Audio

The Bsinger LUX is an in-ear monitor from BASN Audio in the Bsinger series, sold with two detachable cables. According to BASN, it evolved from personal monitor technology and was tested by musicians, and it is intended both for professional monitoring on stage and for personal listening. Shell colours are black, blue, red and brown, and BASN lists it at USD 59.99.

Key specs that matter

Two dynamic drivers are mounted in each earpiece. Frequency response is 20 Hz - 20 kHz. Sensitivity is 101 ±1 dB and impedance is 20 ±1 ohms, measured at 1 kHz. Connection is MMCX at the earpiece and a 3.5 mm jack at the source end. Passive isolation is up to 25 dB of ambient noise.

Engineering and use context

Isolation comes from soft silicone sleeves, and BASN supplies single-layer and double-layer ear tips, each type in three sizes. A good seal is the condition for full noise isolation. The earpieces are light and are worn over the ear, where flexible memory cable earhooks hold them in place and add to the isolation.

Gold-plated MMCX connectors rotate through 360 degrees for a universal fit. Both cables are reinforced - an updated silver-plated cable and a microphone cable with an inline control unit.

The kit includes the Bsinger LUX earpieces, six pairs of silicone ear tips, both cables, a 6.3 mm stereo plug adapter, a carrying case, a cable clip, a cleaning tool and a user manual.

Pairing

The 3.5 mm plug connects to the headphone outputs of portable players, phones and computers and to wireless in-ear monitor bodypacks with a 3.5 mm output. A 6.3 mm headphone socket on an amplifier or mixer takes the supplied 6.3 mm adapter. Replacement cables need an MMCX connector.

Alternatives

The Bsinger BC100 is the same Bsinger series model with a single woven cable instead of the two-cable kit.

Specifications