Hifiverse

Headphones - Denon AH-D9200

Description, images, technical data and specifications

Denon AH-D9200
Image source - (c) Denon

Denon calls the AH-D9200 the flagship of its headphone range, a closed-back over-ear model with Japanese bamboo housings. It is fully made in Japan and hand-crafted at the Denon Shirakawa Audio Works facility. Denon lists it at USD 1,799, and it carries Hi-Res Audio certification.

Key specs that matter

Each earcup carries a patented 50 mm FreeEdge Nanofiber driver with a neodymium magnet of over 1 T. Impedance is 24 ohms, sensitivity is 105 dB/mW, maximum power input is 1800 mW, and frequency response is 5 Hz - 56 kHz. Weight is 375 g. Two detachable cables are included - a 3.0 m silver-coated OFC (oxygen-free copper) cable with a 6.3 mm plug and a 1.3 m cable with a 3.5 mm plug. Both terminate in 2 x 3.5 mm plugs at the headphone end. Accessories are a 3.5 mm to 6.3 mm headphone plug adapter, a storage box and a cleaning cloth.

Engineering and use context

According to Denon, the diaphragm materials were chosen for rigidity and low mass. In the FreeEdge layout a soft, compliant surround lets the driver move without flexing, and Denon states that this cancels unwanted resonances in the diaphragm. Its drivers are Japanese-made and are mounted on vibration-reducing engineered resin baffles. An alloy of neodymium, iron and boron forms the magnet, which occupies a relatively small footprint in the housing.

Japanese bamboo was chosen for the housings because of its vibration damping properties. Since the wood pattern differs from piece to piece, no two pairs are alike. A diecast aluminium hanger frames each housing, and the headband is genuine leather. Earpads use soft engineered Japanese leather over 3D-shaped memory foam. Side pressure is kept to a minimum, and the headphone is shaped to offer a universal fit.

Pairing

Portable players connect through the 1.3 m cable with the 3.5 mm plug. For a headphone amplifier or the headphone socket of an integrated amplifier, the 3.0 m cable with the 6.3 mm plug is used. With the supplied 3.5 mm to 6.3 mm adapter, the shorter cable also fits a 6.3 mm socket.

Alternatives

The Denon AH-D7200 is the closed-back model one step lower, with American walnut housings, a 25 ohm rating and a 385 g weight.

Specifications

  • Model name

    AH-D9200

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    5

  • Frequency response high +/- 10dB (Hz)

    56 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    105

  • Impedance (Ohm (1 kHz))

    24

  • Playback time (hours)

    N/A

  • Weight (g)

    375

  • Official link

More components