XIO is a hybrid universal in-ear monitor and the first joint product of Astell&Kern and 64 Audio. A first teaser appeared at High End Munich in May 2025, and worldwide sales began in August 2025 at USD 3,000. Design, assembly and quality control are carried out by engineers in the United States.
Key specs that matter
Each earpiece has ten drivers and an integrated 4-way passive crossover. Two dynamic drivers cover the low frequencies, six balanced armatures the midrange, one balanced armature the high-mids, and a tia balanced armature the highs. Frequency response is 5 Hz - 22 kHz. Sensitivity is 103 dB SPL (1 kHz, 1 mW) and impedance is 6.3 ohms at 1 kHz. Its connector is a 0.78 mm 2-pin socket, and the supplied cable ends in a 4.4 mm plug.
Engineering and use context
Both dynamic drivers work in a TRUE ISOBARIC arrangement, synchronised through a shared acoustic coupling chamber. Seven balanced armatures for the midrange and high-mids sit in a BA driver manifold assembly. The tia driver is direct-radiating, with no conventional sound tube, and is combined with a custom waveguide. 64 Audio's patented Tubeless In-Ear Audio (tia) system consists of the tia driver, a single-bore design and an acoustic chamber, and XIO uses the first two.
Apex (Air Pressure Exchange) is a patented venting system that releases pressure from the sealed ear canal while keeping noise isolation, and 64 Audio states that it reduces listening fatigue. The standard m15 module was redesigned for XIO in 904L stainless steel with DLC coating. LID (Linear Impedance Design) is a patented circuit that compensates for nonlinear resistance between the drivers for a consistent response regardless of source output impedance. Shells are precision-machined from 904L stainless steel, finished in black Diamond-Like Carbon and closed by a three-dimensional faceplate.
A four-core cross-braided Litz cable of silver-plated UP-OCC copper has an impedance of 0.29 ohm. Included are a 64 Audio leather case, TrueFidelity foam tips, SpinFit silicone tips and standard silicone tips in S, M and L, a cleaning tool, a cleaning cloth and a cable clip. Apex modules m20 (Silver), m15, m12 (Gold) and mX (Black) come in the box.
Pairing
A source with a 4.4 mm balanced headphone output is required for the stock cable. Other 0.78 mm 2-pin cables also fit the earpieces.
Alternatives
The Astell&Kern PATHFINDER, developed with Campfire Audio, is another hybrid in-ear monitor in the range.