Hifiverse

Headphones amplifiers - MasterSound Senso

Description, images, technical data and specifications

MasterSound Senso
Image source - (c) MasterSound

The Senso is an integrated tube headphone amplifier from MasterSound, the Italian company founded in 1995 near Vicenza by the Sanavio family. MasterSound builds single-ended class A amplifiers with its own output transformers, and the Senso is its first headphone amplifier. Each unit is hand-built in Italy, and the price in Hong Kong was HKD 69,900.

Key specs that matter

Output power is 2 x 3.5 W in single-ended class A. The tube complement is two ECC802S in the preamplifier and driver stage and two KT120 in the output stage. Line inputs are one XLR and three RCA (CD, Tuner, Aux), and the MM phono input has 47 kohm loading, 5 mV sensitivity and 44 dB gain. Line input sensitivity is 1 V. Headphone outputs are two 3-pin XLR (L/R), one 4-pin XLR and one 6.35 mm jack. Frequency response is 18 Hz - 49 kHz (0 dB) and 11 Hz - 92 kHz (-3 dB). Power consumption is 111 W. Dimensions are 43 x 33.5 x 25.5 cm (W x D x H), and weight is 18 kg.

Engineering and use context

Both KT120 output tubes operate single-ended, one per channel, into custom MastersounD output transformers. Global negative feedback is 0 dB. Bias is automatic and adjustable, with the adjustment reserved for service. Volume is set by a motorised Alps potentiometer. The Senso is supplied with a complete set of selected and matched tubes, usually already installed.

On the rear panel a three-position headphone impedance selector matches the output stage to the nominal impedance of the headphones, with ranges of 15 - 60 ohms, 60 - 200 ohms and 200 - 500 ohms. MasterSound treats these ranges as a reference for matching rather than absolute limits. Several headphones can be connected at once, though available output power may then drop with the combined load. The 6.35 mm jack is unbalanced, while the dual 3-pin XLR and the 4-pin XLR take balanced headphone cables.

Its balanced XLR line input shares the Aux position of the front input selector. A ground terminal for the turntable sits next to the phono input, and the single RCA line output is fixed-level, for recording devices or other external equipment. Because of the transformer weight the chassis is heavier on one side. The unit is factory-set for the mains voltage of the destination country, either 230 V or 110 - 120 V.

Pairing

A turntable with an MM cartridge connects directly to the phono input. Line sources with balanced outputs connect through the XLR input.

Alternatives

MasterSound has no other headphone amplifier in its range.

Specifications

  • Model name

    Senso

  • Maximum Power, 32 Ohms (mW RMS per channel)

    3500

  • Maximum Power, 50 Ohms (mW RMS per channel)

    N/A

  • Maximum Power, 300 Ohms (mW RMS per channel)

    N/A

  • Maximum Power, 600 Ohms (mW RMS per channel)

    N/A

  • Frequency response low +/- 3dB (Hz)

    18

  • Frequency response high +/- 3dB (Hz)

    49 000

  • Gain (dBu)

    N/A

  • THD (% at 1V RMS, 300 ohms)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • IMD (%, CCIR, 300 Ohms)

    N/A

  • Crosstalk (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Output Impedance (Ohms)

    N/A

  • Dimensions (mm)

    335 x 430 x 255

  • Weight (kg)

    18

  • Official link