Hifiverse

Other devices - Edifier M330 II

Description, images, technical data and specifications

Edifier M330 II
Image source - (c) Edifier

The M330 II is a 2.1 all-in-one speaker from Edifier that runs from its own battery or from the mains. It follows the original M330 in the same retro styling with piano-key buttons on top and adds Apple AirPlay over Wi-Fi to Bluetooth and two wired inputs. Edifier lists the suggested retail price in China at CNY 1069, and the finishes are wood grain, pearl white and black walnut.

Key specs that matter

Drive units are two 25 mm silk dome tweeters and one 100 mm mid/bass unit with a composite wool cone. Distortion-limited output power is 15 W + 15 W for the tweeters and 30 W for the mid/bass channel, and peak power is 120 W in total (30 W + 30 W and 60 W). Rated frequency response is 52 Hz - 20 kHz to the SJ/T 11540-2015 standard and 52 Hz - 40 kHz to the Hi-Res standard. Signal-to-noise ratio is 85 dB(A) or better, and noise level is 25 dB(A) or lower. Bluetooth is version 5.4 with SBC and LDAC codecs. Wi-Fi works on both 2.4 GHz and 5 GHz bands. Inputs are Bluetooth, AUX, USB sound card and Apple AirPlay. Battery capacity is 38.48 Wh (7.4 V, 5200 mAh), rated for 14 hours at everyday volume and 11 hours at 80% volume. Dimensions are 250 x 162 x 179 mm (W x H x D).

Engineering and use context

Both the wired Hi-Res and the wireless Hi-Res certification apply to this model. On the rear panel sit the AUX input, a USB-C input for the USB sound card mode, the mains socket and a charge indicator. A mode LED shows the active source - blue for Bluetooth, green for AUX, red for USB sound card and white for AirPlay. Two Bluetooth devices can stay connected at the same time when dual-device connection is enabled in the EDIFIER Connect app, and after power-up the speaker reconnects to the last two devices. If no device connects for 30 minutes, Bluetooth enters a hidden state and the speaker is no longer visible to new devices. AirPlay setup is done either by a long press on the speaker or through the app over Bluetooth. Compatible Apple devices start from iOS 11.4, tvOS 11.4 and iTunes 12.8. In the box are the speaker, a USB cable, an audio cable, a power cord, the manual and a warranty card. Edifier's model code is EDF100080.

Pairing

A phone or tablet with LDAC support is required for the higher Bluetooth resolution. Apple devices connect over AirPlay on the same Wi-Fi network. A computer connects through the USB-C input in USB sound card mode.

Alternatives

The M230 II is Edifier's retro Bluetooth speaker in the same range.

Specifications

  • Model name

    M330 II

  • Highlights

    Power: 120 W, playtime: up to 14 hours, Bluetooth 5.4, AirPlay 2

  • Dimensions (mm)

    N/A

  • Weight (g)

    N/A

  • Official link