Hifiverse

Preamplifiers - hARt Lab Tune Two

Description, images, technical data and specifications

hARt Lab Tune Two
Image source - (c) hARt Lab

The Tune Two is a reference preamplifier from hARt Lab of Chalandri, Greece. Besides its tube line stage it has a built-in media player, a DAC with coaxial and optical inputs, an MM/MC phono stage and a headphone output. The UK price is GBP 16,500 including VAT.

Key specs that matter

Inputs are four line-level, one phono, one media player with WLAN, LAN and three USB ports, one coaxial and one optical. Outputs are one hybrid, one tube direct and one 6.35 mm TRS headphone jack. Line level gain is 21 dB, and frequency response is 5 Hz - 120 kHz. Recommended load is above 16 ohms for the hybrid output, above 30 kohms for the direct output and 16 - 600 ohms for headphones. Phono gain is 40 dB (MM) and 66 dB (MC), with resistive loading of 47 kohms, 470, 220, 150, 100, 82, 70 and 60 ohms and capacitive loading of 0, 100, 220 and 320 pF. Power consumption is 2 W in standby and 50 W at idle. Net dimensions are 200 x 430 x 390 mm (H x W x D, with cover and jacks), and weight is 12 kg.

Engineering and use context

Gain comes from a single class A tube stage with two CV181 tubes (or equivalent), lightly biased and without any feedback. A class A tracking buffer after it forms the hybrid path, and the alternative direct output takes the signal from the tube stage alone. Volume is set by the SLadd relay-based attenuator with 64 steps of 1 dB, constant input impedance and zero tracking error between channels.

Power comes from the VAcc battery emulator, with 12 individual, fully separated supplies for digital audio, analogue audio and digital control. Audio circuits are in a dual mono configuration with a GStar single common earth point. A suspended attachment decouples the power transformers from the audio circuitry, and an acrylic back panel carries backplane source switching.

In the DAC section, digital signals are bit-perfect sample rate converted and re-clocked. The phono stage is a fully configurable class A design with discrete active circuitry, and the headphone amplifier is a tube-MOSFET class A hybrid. hARt Lab specifies an amorphous wooden fibreboard chassis to damp vibration, MICoat multi-coat paint, removable side panels and FloatO anti-resonance feet. Control is from any modern web browser on a phone, tablet or PC, and an infrared remote covers the main functions. Front lighting offers 15 colours, three brightness levels or off.

Pairing

The hybrid output is intended for driving power amplifiers and cables. A power amplifier with a high input impedance is required for the direct tube output. A phono stage is not required, as MM and MC inputs are built in.

Alternatives

The Tune Four is hARt Lab's higher preamplifier model.

Specifications

  • Model name

    Tune Two

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    4

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    21

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    120000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    200 x 430 x 390

  • Weight (kg)

    12

  • Official link

Related content