Hifiverse

Preamplifiers - Galion Audio TS P75

Description, images, technical data and specifications

Galion Audio TS P75
Image source - (c) Galion Audio

The TS P75 is a tube line preamplifier from Galion Audio, the brand that also trades as ThomasAndStereo and is run by Thomas Tan. Galion designed it together with Doge Audio as a preamplifier for its TS A75 power amplifier. It is made in China and sold and shipped from Canada, and the price is USD 1,995. There is no DAC, phono stage, headphone output or streaming section.

Key specs that matter

Tube complement is four 12AT7, and units ship with PSVANE 12AT7-S tubes. On the rear panel are four RCA line inputs and two sets of RCA outputs, with no balanced connections. Input sensitivity (lines 1 - 4, for 2 V out) is 500 mV, maximum input voltage is 8 V and input impedance is 50 kOhm. Output impedance is below 600 ohms, and rated output is above 30 V. Frequency response is 8 Hz - 160 kHz. THD is 0.01% (1 kHz, 2 V output), and SNR is 100 dB or more. Power consumption is 35 W. Dimensions are 435 x 330 x 108 mm, and weight is 10 kg (13 kg shipped).

Engineering and use context

Galion uses custom-made toroidal transformers engineered specifically for the TS P75 in the power supply. Inside, capacitors from three makers - ClarityCap, Solen and Jupiter Audio - are combined in the circuit. Volume is set with a genuine Japanese Alps potentiometer, and the internal wiring is handpicked. According to Galion, many prototypes and component combinations were built and tested before production.

Two mains versions are built. The 120 V model takes a T 2AL 250 V fuse, and the 220 - 240 V model takes a T 1AL 250 V fuse, both in the 5 x 20 mm size. Shipping dimensions are 485 x 565 x 235 mm. The warranty runs two years, with six months on the tubes.

Pairing

The matching power amplifier is the Galion TS A75. A second RCA output set allows a second amplifier or a powered subwoofer. An external DAC with RCA line outputs is required for digital sources.

Alternatives

Galion Audio lists no other preamplifier design, as the TS P75C uses the same internal architecture in a case with rounded corners.

Specifications

  • Model name

    TS P75

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    4

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    500

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    600

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    8

  • Frequency response high +/- 3dB (Hz)

    160 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    >100

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.01

  • Dimensions (mm)

    435 x 330 x 108

  • Weight (kg)

    10

  • Official link