Hifiverse

Preamplifiers - Nagra Reference Preamp

Description, images, technical data and specifications

Nagra Reference Preamp
Image source - (c) Nagra

The Reference Preamp is a two-channel tube line preamplifier from Nagra, the Swiss company founded in 1951. Nagra says it was created by an engineering team with more than 70 years of experience in products for professional audio, national security and military use. It extends the HD Preamp, released in 2017 and updated in 2020, with insights gained from the Reference Turntable and the HD PHONO. Audio circuits and power supply occupy separate chassis, and a second power supply can be added later.

Key specs that matter

Its tube complement is two E88CC, new and selected and tested by Nagra. Inputs are XLR 1, XLR 2, RCA 1, RCA 2 and RCA 3/BYPASS, plus a pair of XLR bypass inputs. Input level for 0 dB on the modulometer is 1 V (Low), 2 V (High) or 10 V (Studio) on the XLR inputs and 1 V or 2 V on RCA 3, while RCA 1 and RCA 2 are fixed at 1 V. Input impedance is above 50 kohms. Output impedance is below 0.2 ohms at -15 dB volume and below 40 ohms at 0 dB. Frequency response is 10 Hz - 100 kHz (±0.1 dB) and 10 Hz - 200 kHz (+1.5/-0.2 dB). Dynamic range exceeds 150 dB, and crosstalk is better than 130 dB at 1 kHz and 110 dB at 20 kHz. The audio chassis measures 438 x 396 x 121 mm and weighs 13.5 kg, and the power supply weighs 16.5 kg.

Engineering and use context

Inside there are effectively two preamplifiers. Front L and R potentiometers set the level, and no sound passes through them. The signal then runs through a combination of taps on Nagra-wound transformers, with identical left and right gain and phase and no resistor or potentiometer in its path. Its output stage is balanced by design.

New high-voltage supplies in the audio unit generate the 200 V DC grid tension, and custom-made capacitors are used there. Super-capacitors sit in the power supply chassis, which connects over LEMO umbilicals with 9-pin analogue and 7-pin digital plugs. With two supplies, one powers the audio section and the other the controls, relay switching and home automation. A phenolic layer inside the top cover adds damping. Each chassis stands on four decoupling feet, and eight ceramic balls are supplied for stacking. The modulometer, inherited from the Nagra II recorder of 1952, shows input or output level with 0 dB equal to 1 V RMS. A 3-minute preheating sequence runs at every switch-on.

Pairing

Nagra recommends the balanced XLR outputs for complete galvanic isolation, especially with the Reference Amp. XLR inputs are unbalanced unless the optional balancing transformers, hand-wound in Romanel-sur-Lausanne, are installed. A REC/AUX RCA pair gives a fixed or variable level output for a recorder or subwoofer.

Alternatives

The Nagra HD Preamp is the tube line preamplifier on which the Reference Preamp is based.

Specifications

  • Model name

    Reference Preamp

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content

More components