The PST 100 Anniversary Edition is a version of the PST 100, the tube line preamplifier in the 100 series of Ypsilon Electronics from Greece. It marks the company's 30th anniversary and builds on the PST 100 SE. Its world premiere took place at Audio Show Deluxe at Whittlebury Park in the UK on 22 and 23 March 2025. Ypsilon publishes its technical description and specifications for the PST 100 MK2, and the figures below are taken from that model.
Key specs that matter
Its gain stage uses one C3m triode per channel, and tube rectification uses a 6CA4 followed by a choke filter. Volume is set by a transformer attenuator with 31 taps and a total attenuation of 54 dB at its lowest tap. Ypsilon's published figures for the PST 100 MK2 are 9 Hz - 100 kHz (-3 dB) bandwidth, 50 kohms input impedance, 150 ohms output impedance, a gain of x7 (16.9 dB), 100 VA maximum consumption, 400 x 180 x 410 mm (W x H x D) and 25 kg.
Engineering and use context
Ypsilon regards the means of signal attenuation, not the active circuit, as the most critical part of a preamplifier. After using resistor attenuators with Vishay resistors in the past, the company developed its own transformer as the means of attenuation. According to Ypsilon, the magnetic circuit of a transformer can be ultra linear when the best core materials are used.
In the PST 100 the active gain stage is a no-feedback, single-ended C3m triode stage, transformer coupled, and the transformer attenuator is placed after it. Ypsilon winds its own transformers, tailored to each design.
Pairing
Ypsilon's matching power amplifiers include the Hyperion and the Aelius II monoblocks. All inputs are line level, so a phono stage such as the Ypsilon VPS100 is required for vinyl.
Alternatives
The PST 100 is also offered as the PST 100 TA, with the transformer attenuators and no tube stage, upgradeable to the full version at the factory.