Hifiverse

Preamplifiers - Meitner Audio PRE Stereo

Description, images, technical data and specifications

Meitner Audio PRE Stereo
Image source - (c) Meitner Audio

The PRE is a stereo line preamplifier from Meitner Audio, the sister brand of EMM Labs, founded and led by Ed Meitner in Calgary, Alberta. It is designed and manufactured in Canada and draws on the reference EMM Labs preamplifier, which sells at USD 25,000. Shipping began in March 2023, and the list price is USD 7,500.

Key specs that matter

Analogue inputs are one pair balanced (XLR) and two pairs single-ended (RCA), and outputs are one XLR pair and one RCA pair. Input impedance is 20 kohms balanced and 10 kohms single-ended. Output impedance is 150 ohms balanced and 75 ohms single-ended. System gain is +6 dB, gain control range is 74 dB and maximum input level is +18 dBu (6.2 V RMS). S/N ratio is better than 116 dB at 4 V RMS output (20 kHz bandwidth), THD is less than 0.004% and frequency range is 0 Hz - 200 kHz. Its power supply is power factor corrected, accepts 90-260 V at 50/60 Hz and draws max. 50 W. Dimensions are 435 x 400 x 92 mm (W x D x H), and net weight with the remote control is 7.43 kg.

Engineering and use context

Input selection uses contactless switching, and the signal paths are discrete and dual-balanced. Meitner specifies a pure class A power stage for driving cables and loads. Level is set by a proprietary software-driven analogue volume control, which according to Meitner has no loss of signal bandwidth over the entire volume range. Each input stores three volume presets, A, B and C, and a balance control is included. A DC protection circuit disables and locks the outputs when it detects DC on any input. After the faulty input is removed, a reboot returns the PRE to normal operation.

For home theatre use, a bypass setting passes the input to the output without attenuation or amplification, at volume 76 for the XLR output and 88 for the RCA output. Both output pairs are active at the same time, for example XLR to the main amplifier and RCA to a subwoofer or headphone amplifier. An RS232 port is used for system upgrades and remote commands. On the fine bead-blasted front panel, in silver or black, there are an OLED display and touch buttons for mute and input. An infrared remote control is included, and the warranty runs three years.

Pairing

The XLR output connects to power amplifiers with balanced inputs. Digital sources require an external DAC, such as the Meitner MA3.

Alternatives

Meitner Audio has no other line preamplifier in its range.

Specifications

  • Model name

    PRE Stereo

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    2

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    1

  • Gain (dBu)

    74

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    20 000

  • Input impedance (single-ended) (Ω)

    10 000

  • Output impedance (balanced) (Ω)

    150

  • Output impedance (single-ended) (Ω)

    75

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    >116

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.004

  • Dimensions (mm)

    435 x 400 x 92

  • Weight (kg)

    7.43

  • Official link