Hifiverse

Preamplifiers — Audionet PRE I G3

Description, images, technical data and specifications

Audionet PRE I G3
Image source - (c) Audionet

The PRE I G3 is the third generation of the PRE I, a microprocessor-controlled preamplifier from Audionet of Berlin. Besides six line inputs it has two subwoofer outputs, a switchable headphone output, a monitor loop, a trigger output and a home cinema bypass mode. Audionet's optional phono preamplifier board can be added.

Key specs that matter

Bandwidth is 0 - 3 MHz (-3 dB), DC-coupled. THD+N is -110 dB (20 Hz - 20 kHz, Vin 4.5 Vrms), and SNR is 120 dB (1 kHz, Vin max). Channel separation is 100 dB between channels and 108 dB between inputs, both at 20 kHz. Input impedance is 82 kohms on the line inputs and 15 kohms on the XLR input. Maximum output voltage is 8 Vrms on the line outputs, 16 Vrms on the XLR outputs and 8 Vrms on the headphone output (max. gain 6 dB). Output impedance is 22 ohms on line and XLR and 47 ohms on headphones. Width is 430 mm, depth 310 mm and weight 6 kg.

Engineering and use context

Circuit size is reduced for the high-frequency properties, and the signal paths are free of coils and chokes. Gold-coated precision relays switch the input signal and earth, and ground wires run in a star to one central point. At the input sits a cascoded, bootstrapped, monolithic double-FET buffer with virtually infinite input impedance, followed by a DC-coupled driver stage. Volume and balance are set by an electronically switched, real-time linearised high-precision resistor network. Its output driver combines high-speed bipolar op-amps with discrete A/B drivers running high bias current. The signal path is DC-coupled without capacitors, with optional AC coupling through an active DC servo.

An encapsulated 50 VA toroid core transformer and 30,000 µF of audio-grade electrolytic capacitance form the supply, smoothed by two fast discrete bipolar regulators with gallium arsenide precision voltage references. A flashable microprocessor with its own power supply runs the unit, and the digital control is physically and electrically separated from the signal path.

Both subwoofer outputs work either as left and right signals or as a summed signal for one subwoofer. Connections include five RCA and one XLR input pair, RCA monitor in and out, RCA line and record outputs, one XLR output, two optical Audionet Link outputs, a 3.5 mm 12 V trigger output (5 V optional) and a 5-pole socket for the optional EPS power supply. Inputs can be named and their sensitivity changed, mains phase is recognised automatically, and the RC 1 metal remote control is supplied.

Pairing

A power amplifier with balanced XLR or RCA inputs is required. Its subwoofer outputs allow one or two active subwoofers. The optional external power supply is the EPS.

Alternatives

The PRE G2 is Audionet's reference preamplifier with double-mono construction.

Specifications

  • Model name

    PRE I G3

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    5

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    15 000

  • Input impedance (single-ended) (Ω)

    82 000

  • Output impedance (balanced) (Ω)

    47

  • Output impedance (single-ended) (Ω)

    22

  • Maximum output level (balanced) (dBu)

    16

  • Maximum output level (single-ended) (dBu)

    8

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    0

  • Frequency response high +/- 3dB (Hz)

    3 000 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    120

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    430 × 700 × 310

  • Weight (kg)

    6

  • Official link

More components