Hifiverse

Preamplifiers - Nuprime Audio PRA-9X

Description, images, technical data and specifications

Nuprime Audio PRA-9X
Image source - (c) Nuprime Audio

The PRA-9X is a fully balanced preamplifier from NuPrime Audio's 8 & 9 Series, with an MM phono input and a 6.3 mm headphone output alongside the line stage. NuPrime designed it for ultra-low distortion and lists it at USD 1,199 in black or silver.

Key specs that matter

Inputs are one MM phono, two RCA stereo and one XLR stereo, and outputs are one pair of RCA, one pair of XLR and the headphone socket. Line stage input resistance is 20 kohms and output resistance is 10 ohms. Gain is 17 dB (1 kHz). THD+N is 0.0004% and S/N is >115 dB, both at 7.5 Vrms. Frequency response is 0 Hz - 50 kHz (0.2 dB) and 200 kHz (-3 dB). The phono stage has 4.0 mV sensitivity and 50 dB gain to the line output (1 kHz), with input resistance of 32, 47 or 100 kohms and capacitance of 100, 220 or 320 pF. Headphone output is 560 mW into 32 ohms and 110 mW into 600 ohms, with THD+N of 0.004% (32 ohms, 480 mW) and 0.0015% (600 ohms, 100 mW). Dimensions are 55 x 235 x 281 mm (H x W x D), and weight is 3 kg.

Engineering and use context

Four new NuPrime ultra-low distortion amplifier modules, each using a MUSES8820 op-amp in a new amplifying circuit, form the line outputs, and NuPrime credits its next-generation current booster circuit for the distortion figure. Inputs and outputs are switched by audio relays. The phono section is a 2-stage RIAA amplifier with NJR MUSES8820 op-amps, and its load settings are made with switches on the bottom of the case.

Volume is digitally controlled in 0.5 dB steps with memory recall. Each step activates a dedicated analogue switch with high-precision chip resistors, and the volume control is an independent 4-channel design (L+/L-, R+/R-). NuPrime quotes 114 dB S/N for this volume section. Trigger input and output connections switch other devices on and off. A voltage select switch sets the unit for 90 - 130 V or 210 - 250 V AC, and NuPrime gives a one-year warranty.

Pairing

A power amplifier with XLR or RCA inputs is required. A moving magnet cartridge connects directly to the phono input. The matching DAC in the same series is the NuPrime DAC-9X.

Alternatives

The NuPrime AMG PRA is the preamplifier of NuPrime's AMG range.

Specifications

  • Model name

    PRA-9X

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    2 + 1 (Phono)

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    1

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    20 000

  • Input impedance (single-ended) (Ω)

    20 000

  • Output impedance (balanced) (Ω)

    10

  • Output impedance (single-ended) (Ω)

    10

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    0

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    >115

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.0004

  • Dimensions (mm)

    55 x 235 x 281

  • Weight (kg)

    3

  • Official link