The Ovation SD 6.3 and SD 8.3 are streaming preamplifiers from AVM Audio Video Manufaktur of Germany, built in the case size of the Ovation line. Each combines an analogue preamplifier with the AVM X-STREAM Engine, a quad DAC and a Class-A headphone amplifier. The two models differ in amplification technology - the SD 6.3 uses pure transistor technology, and the SD 8.3 has a tube stage.
Key specs that matter
Input impedance is 10 kohm (RCA) and 20 kohm (XLR), and output impedance is 47 ohms (RCA) and 94 ohms (XLR). THD is below 0.001% for the SD 6.3 and below 0.02% for the SD 8.3, with signal-to-noise above 98 dB. Frequency response at -3 dB runs from DC to above 70 kHz on the SD 6.3 and from below 5 Hz to above 30 kHz on the SD 8.3. Channel crosstalk is above 100 dB, input headroom is 4.3 V and the LINE OUT level is 2.5 V. The DAC accepts PCM up to 32-bit/384 kHz and DSD128. Dimensions are 430 x 122 x 350 mm (W x H x D) and weight is 12 kg.
Engineering and use context
Inputs comprise one XLR and one RCA analogue pair and six digital inputs - two optical, two coaxial, AES/EBU and an asynchronous USB-B for a PC or Mac. A USB-A port is reserved for hard drives and USB sticks. Outputs are XLR, variable RCA, fixed RCA and coaxial plus optical digital outputs, with two 12 V trigger outputs. Streaming covers AirPlay 2, Spotify Connect, TIDAL Connect, Qobuz, UPnP and web radio, and the unit is Roon Ready. Multiroom and Party Sync mode, Bluetooth 5.0 and LAN or dual-band WiFi connection are also included.
AVM describes the design as modular - the DAC and additional input and output modules can be configured individually. The power supply has separate supply units. Bass, treble, nine loudness curves and a balance control of ±9.5 dB are available, and the tone section can be set to bypass. A rear Phase LED shows incorrect mains polarity. Its headphone amplifier has an output impedance of 15 ohms and a gain factor of 3.0. Power consumption is below 35 W at idle and 60 W at maximum. Control is via the RC X app for iOS and Android, with the RC 9 remote with colour display as an option.
Pairing
The matching power amplifiers are the Ovation SA 8.3 stereo amplifier and the MA 8.3 monoblocks. Its XLR output allows long balanced cable runs to a power amplifier. A separate phono stage is required for vinyl.
Alternatives
The AVM Ovation PA 8.3 is a modular preamplifier without streaming.