The Makua is the analogue preamplifier from Mola Mola of Groningen, the Netherlands, with circuits by the company's CTO Bruno Putzeys. Mola Mola designed it as a complete preamplifier - the basic unit is a gain stage with a programmable routing matrix, and the chassis has room for an optional DAC and phono stage. US prices were USD 12,200 for the base Makua, USD 3,000 for the phono option and USD 8,500 for the DAC option. It is Roon Ready certified.
Key specs that matter
There are five stereo inputs, each switchable between XLR and floating RCA and assignable as line or phono. Outputs are two parallel balanced XLR pairs, plus four programmable trigger outputs on 3.5 mm jacks. Input impedance is 100 kohm and output impedance is 44 ohms. Maximum input and output level is 20 dBu (7.75 Vrms). Unweighted noise at unity gain is 1.9 µV. Bandwidth is above 200 kHz. Gain range is -70 dB to +15 dB, with resolution better than 0.2 dB over the normal listening range. Distortion (THD, IMD) at maximum level is not measurable, estimated at around -150 dB. Dimensions are 420 x 110 x 345 mm (W x H x D, depth including knob and connectors), and weight is 11 kg.
Engineering and use context
All stages use discrete amplifier modules in a single-ended driven differential topology. Mola Mola says this structure prevents noise from propagating through the chain and makes the unit immune to mains quality and choice of interlinks. Its relay-based volume control acts directly on the gain of the output stage, with greater dynamic range and linearity than a stepped attenuator.
Software controls routing and processing - balance, input gain offset, phase invert, mono sum and a mastering mode - and any input can be routed through an option board such as the phono stage. Six front preset buttons store any combination of channel, processing and routing, programmed over RS232 or Bluetooth with the Mola Mola Remote app.
On the DAC option, a two-board stack, all incoming data is upsampled to 3.125 MHz/32 bits and converted to noise-shaped PWM, and two mono DACs each use a discrete 32-stage FIR DAC with a 4th-order filtering I/V converter, for 130 dB SNR. A 100 MHz SC-cut oscillator is the clock. The phono option has fully independent MC and MM stages, gain in 5 dB steps over a 40 dB range, switchable input resistance and capacitance, and EQ curves including most 78 rpm curves.
Pairing
The two parallel XLR outputs allow bi-amping with two power amplifiers. Any source with XLR or RCA line outputs connects directly, and a turntable requires the phono option.
Alternatives
Mola Mola makes no other preamplifier - the Tambaqui is a DAC with digital volume control and the Lupe is a standalone phono stage.