The LINK 10n is a 2.1-channel streaming preamplifier from Marantz, positioned as the reference model of its type and powered by HEOS. One chassis holds a DAC, an MM/MC phono stage, an HDMI ARC connection, a subwoofer output and a discrete headphone amplifier. Its triple-layer aluminium chassis has copper plating and a machined, brushed aluminium control surface. Finishes are Black and Marantz Champagne.
Key specs that matter
Analogue inputs are one balanced XLR pair, one RCA line pair and an MM/MC phono input. Digital inputs are two optical and one coaxial (44.1 - 192 kHz), HDMI ARC with CEC and asynchronous USB-B. Outputs comprise fixed and variable pairs on both XLR and RCA, a subwoofer output with an adjustable low-pass filter, and switchable coaxial and optical outputs. Line output level is 2.0 Vrms unbalanced and 4.0 Vrms balanced. Through the analogue inputs, frequency response is 5 Hz - 100 kHz (+0/-3 dB) and THD is 0.001% (20 Hz - 20 kHz). S/N is 122 dB on line and balanced inputs, 88 dB for MM and 76 dB for MC. With PCM sources the response is 2 Hz - 50 kHz (-3 dB) and harmonic distortion is 0.0004%. Headphone output is 130 mW into 32 ohms. The cabinet is 440 x 192 x 422 mm (472 mm deep with antenna) and weighs 33.3 kg.
Engineering and use context
Marantz uses its New HDAM High Grade circuit for the preamplifier stage, in full balance, and New HDAM in the output circuit. Volume is controlled electronically by a MUSES 72323 with variable gain, shown as 0 - 100 in 0.5 steps or as -99.5 dB to 0 dB. Bass, treble and balance are adjusted electronically. A toroidal power transformer is used.
On the digital side the DAC circuit is New MMM-Conversion. MMM-Stream adds selectable dither, four noise shaper settings (Balanced, Natural, Dynamic Music, Dynamic Voice) and two digital filters, alongside a jitter reducer. For the USB-B input there is a DAC master clock design and the Complete Isolation System Duo isolator. Phono equalisation is a Marantz in-house EQ stage, with MC impedance selectable at 32, 100 or 390 ohms and an MM input impedance of 39 kohms.
Each side cover is aluminium up to 15.8 mm thick, and the rear panel is triple-layer copper-plated. HEOS streaming is joined by Roon Ready status, Qobuz, Bluetooth and Apple Siri and Google Assistant voice control, and the front panel carries an HD TFT colour display.
Pairing
A stereo power amplifier is required, and the variable XLR and RCA outputs allow balanced or unbalanced connection. The subwoofer output allows a 2.1 system with an active subwoofer. Over the remote control bus a connected Marantz amplifier switches on with the LINK 10n.
Alternatives
The Marantz AV10 is the brand's multichannel AV preamplifier.