Hifiverse

Preamplifiers - Ampsandsound Badlands

Description, images, technical data and specifications

Ampsandsound Badlands
Image source - (c) Ampsandsound

The Badlands Tube Stereo Preamplifier is a tube-rectified stereo line stage from ampsandsound of Southern California. Ampsandsound presents it as an access point to its Yosemite Preamplifier, a Yosemite in a smaller and simpler package, and introduced it at AXPONA 2026. Two builds are offered - PCB-based wiring at USD 12,000 and turret-based wiring at USD 15,000. It is one of four preamplifiers in the catalogue, between the USD 2,000 Stereo Preamplifier and the Yosemite and Yellowstone models.

Key specs that matter

Gain is 16 dB in both builds. For the turret version ampsandsound specifies 15 µV RMS noise, 0.004% THD, 0.007% THD+N and a frequency response of 2 Hz (+1 dB) - 70 kHz (-1 dB). Its PCB version has 4 µV RMS noise, 0.007% THD, 0.008% THD+N and 5 Hz - 80 kHz (-1 dB). Inputs are one stereo XLR pair and two stereo RCA pairs, and the outputs are on RCA. The chassis measures 305 x 254 x 152 mm (W x D x H).

Engineering and use context

This line stage is based on the Marantz 7 and uses no voltage regulators and no integrated circuits. Two 12AX7 tubes, one per channel, provide the gain, and a centred 12BH7 is the driver. Rectification is by a single tube, and the socket accepts a 5Y3, 5V4, 5U4 or 5AR4.

In the power supply ampsandsound uses its in-house power transformer. Badlands is the first model of the company with filament regulation via a filament choke. In total there are one high-voltage power transformer, one power supply choke, one filament choke and two input transformers. These custom Cinemag transformers perform the balanced to single-ended conversion at the XLR input. Volume is set by a 24-step potentiometer for precise channel balance. A lifetime transferable warranty applies when service is carried out by ampsandsound.

Pairing

The two sets of RCA outputs allow connection of two power amplifiers. A balanced DAC connects to the XLR input, and an external phono stage to one of the RCA inputs. In the ampsandsound range, the matching headphone amplifier is the Kenzie and the matching power amplifier is the Stereo 17.

Alternatives

The ampsandsound Yosemite Preamplifier is the tube line stage the Badlands derives from, listed at USD 20,000.

Specifications

  • Model name

    Badlands

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    1

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    16

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    2

  • Frequency response high +/- 3dB (Hz)

    70 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.007

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content