Hifiverse

Preamplifiers - Bella Sound Kalalau

Description, images, technical data and specifications

Bella Sound Kalalau
Image source - (c) Bella Sound

The Kalalau is the line preamplifier from Bella Sound of El Granada, California. Its name translates as Road to Paradise and refers to the path it sets the signal on, towards the brand's Kahili 800 W stereo amplifier or Hanalei 700 W monoblocks. Bella Sound builds it by hand in the USA, and the price is USD 20,000.

Key specs that matter

Gain is 10.3 dB single-ended and 16.3 dB balanced, at attenuator maximum. Frequency response is 1 Hz - 400 kHz at a 30 dB reference attenuator setting. THD is 0.008% typical (1 Vrms, 1 kHz). Signal-to-noise ratio is 103 dB (1 Vrms output, 20 kHz noise bandwidth, unweighted), and output noise is 50 nV/√Hz typical at 1 kHz. Input impedance is 50 kohms, output impedance is 125 ohms, and absolute maximum output is 10 Vp. Attenuation runs in 63 levels of 1 dB. Power consumption is 3.6 W in standby and 34 W active, on 120/240 VAC, 50 - 60 Hz. It measures 490 x 140 x 429 mm (W x H x D) and weighs 21.3 kg.

Engineering and use context

Bella Sound chose an all-discrete J-FET design to reach low noise and high linearity together. The circuit is class A and fully balanced from head to tail. It is DC-coupled from inputs to outputs, with no signal path capacitors, and high-quality film capacitors bypass all four power supplies. Naked metal foil resistors are used throughout the signal path, and volume is set by Khozmo balanced attenuators with Vishay MELF resistors.

Each of the regulated power supplies is triple filtered, and a full complement of Bybee Quantum AC Purifiers is used. Both amplifier channels and the power supply sit in separate Faraday cages. Transformers, connectors and wiring are cryogenically treated.

All 14 inputs and outputs are on both true balanced XLR and Cardas RCA. Inputs are In 1, In 2, In 3, Tape In and Home Theater Bypass In, and outputs are Main Out and a buffered Tape Out. Its chassis is fully milled on a 13 mm floor plate, under a thick polished stainless steel cover that forms the final shielding layer. On the front is a hard maple faceplate, black-finished with stainless steel inlays. A remote control is included.

Pairing

The matching power amplifiers are the Kahili stereo amplifier and the Hanalei monoblocks. Both balanced and single-ended outputs are available. The Home Theater Bypass input allows a surround processor to share the power amplifiers.

Alternatives

The Kalalau is the only preamplifier Bella Sound makes, so the brand has no second model in this category.

Specifications

  • Model name

    Kalalau

  • Analog inputs (balanced)

    2

  • Analog inputs (single-ended)

    3

  • Analog outputs (balanced)

    2

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    10.3dB SE, 16.3dB Bal

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    50 000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    1

  • Frequency response high +/- 3dB (Hz)

    400 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    103

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.008

  • Dimensions (mm)

    489.9 × 139.7 × 429.3

  • Weight (kg)

    21.3

  • Official link