The JC2BP is a dual-mono, all-analogue line stage preamplifier in Parasound's JC series, designed by John Curl. It is the JC 2 with a home theater bypass added, and Parasound states that its specifications are 100% the same as those of the original JC 2. Only line-level inputs are provided, with no phono input. The 3U chassis can be rack mounted with the HRA 3 kit, sold separately.
Key specs that matter
Frequency response is 5 Hz - 100 kHz (+0/-3 dB). THD is below 0.003% at 100 Hz and below 0.005% at 20 kHz, and IM distortion is below 0.003%. S/N (input shorted) is above 116 dB IHF A-weighted and above 104 dB unweighted. Crosstalk is above 100 dB at 10 kHz and above 90 dB at 20 kHz. Maximum gain is 14 dB, input sensitivity is 200 mV for 1 V output, and maximum output is 8 V. Input impedance is 30 kohms unbalanced and 30 kohms per leg balanced, and output impedance is below 60 ohms. Each channel's gain control has a range of -10 dB. Power consumption is 25 W in standby and 30 W when on. Dimensions are 437 x 406 x 150 mm (W x D x H, with feet), and weight is 11 kg.
Engineering and use context
The circuit is direct DC servo-coupled with no capacitors in the signal path and uses hand-matched complementary FETs on dual-mono left and right channel boards. Volume is set by a four-gang motor-driven analogue master volume control, with separate TKD analogue gain controls for the left and right channels. Around the audio boards, 3/8 in (9.5 mm) thick aluminium shielding blocks noise from the power supplies and control circuits. Its power supply has a high capacity R-core audio power transformer and inductor and hyper-fast soft recovery bridge rectifier diodes, and a separate supply powers the controller, relay coils, triggers and LEDs. Each channel's input is switched by its own gold-on-silver contact relay, and mute uses independent left and right relays.
There are six RCA input pairs, two of which can be switched to XLR. Of the four output pairs, the main XLR and main RCA outputs have polarity switched from the remote, one RCA pair is inverted polarity only and one RCA pair is a fixed-level recorder output. Parasound uses Vampire 24k gold-plated RCA jacks, Neutrik XLR connectors and Canare internal wiring. Home theater bypass can be assigned to any input, works with balanced and unbalanced connections and locks out the volume control. Four 12 V trigger outputs, a two-way RS-232 port and IR repeater input and loop jacks complete the rear panel.
Pairing
A phono stage or DAC with a line-level output is required for record and digital sources. The four trigger outputs allow automatic turn-on of up to four power amplifiers.
Alternatives
The Halo P6 is Parasound's other two-channel preamplifier, with a built-in DAC and phono stage.