The HEOS Link HS2 is a network streaming preamplifier from Denon, described by the company as a pre-amplifier for HEOS audio distribution. It adds network playback and HEOS multi-room to an existing stereo amplifier, AV receiver or pair of active speakers, and it has no power amplifier of its own. This HS2 version brought Bluetooth and high-resolution file support to the original HEOS Link, and the US price was USD 400. Denon describes it as Sound Master Tuned.
Key specs that matter
Analogue output level is 2.0 Vrms fixed (10 kohm) or variable. THD+N is 0.003% (1 kHz), S/N ratio is 100 dB and frequency response is 10 Hz - 100 kHz (+1, -3 dB). Supported formats are FLAC, ALAC and WAV files at up to 192 kHz/24-bit, DSD at 2.8 MHz and 5.6 MHz, AAC and MP3 up to 320 kbps and WMA up to 192 kbps. Wireless networking conforms to IEEE 802.11a/b/g/n/ac at 2.4 GHz and 5 GHz, with an RJ-45 port for wired LAN. Dimensions are 74 x 155 x 150 mm (H x W x D), and weight is 1.3 kg.
Engineering and use context
Inputs on the back panel are LINE IN stereo RCA, a 3.5 mm AUX IN jack, OPTICAL IN and a USB port (5 V/1 A) for storage devices. Outputs are an analogue PRE OUT, a SUBWOOFER pre-out for a powered subwoofer, and COAXIAL OUT and OPTICAL OUT digital connections. A 12 V TRIGGER OUT switches an external amplifier, and an IR OUT controls a Denon AV receiver, PMA amplifier or system. Its rear panel also carries the NETWORK connector, the AC inlet and the Bluetooth and CONNECT buttons, while volume and mute controls are on the side.
According to Denon, the Link integrates with most Denon AV receivers, preamplifiers and hi-fi systems so that they operate as one device. Through IP, IR or trigger control it can turn the connected unit on and off, select its input and adjust volume and mute. Music comes from USB drives, DLNA-compliant music servers, files on iOS, Android or Kindle Fire devices, Bluetooth and services such as Spotify, TIDAL, Deezer, SoundCloud and TuneIn internet radio. Content on a USB drive can play locally or on any HEOS player in the network. Each HEOS room can play the same stream or its own selection, all controlled from the HEOS app for iOS and Android. Supplied with it are a power cord, a 3.5 mm setup cable, an RCA cable, an Ethernet cable, an IR emitter cable, an IR direct cable and a Quick Start guide.
Pairing
A power amplifier, an integrated amplifier with a line input, an AV receiver or active speakers are required. The coaxial and optical outputs allow an external DAC.
Alternatives
The original HEOS Link is the first-generation version of this Denon preamplifier, without Bluetooth and high-resolution file support.