Hifiverse

Preamplifiers - Fluo PRE 1

Description, images, technical data and specifications

Fluo PRE 1
Image source - (c) Fluo

The PRE 1 is a dual mono line preamplifier from Fluo of Winchester, England, housed in a single chassis. Left and right channels each have an independent circuit PCB.

Key specs that matter

Input impedance is 20 kohms on all inputs, and on the balanced XLR inputs the same 20 kohms is kept on both pin 2 and pin 3. Measured at the 2nd and 3rd harmonics, distortion is 0.0002%, or 114 dB below the signal level. Output impedance is 75 ohms on the unbalanced RCA outputs and 150 ohms on the balanced XLR outputs. Its internal level control is a 1 kohm type. Dimensions are 485 x 125 x 525 mm (W x H x D).

Engineering and use context

All audio inputs and outputs use the JFET balanced input amplifier circuit of the Fluo power amplifiers, and the power supply uses the same low-noise technology. According to Fluo, the 1 kohm level control reduces noise and interference compared with the usual 47 kohm standard.

Pairing

The matching power amplifiers are the Fluo DM125, DM250 and M500. Its XLR and RCA outputs connect to balanced or single-ended power amplifiers.

Alternatives

Fluo has no other preamplifier, and the PRE 1 is the only control unit in its range.

Specifications

  • Model name

    PRE 1

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    20 000

  • Input impedance (single-ended) (Ω)

    20 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    114

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0,0002

  • Dimensions (mm)

    485 x 125 x 525

  • Weight (kg)

    N/A

  • Official link