Hifiverse

Preamplifiers — Doshi Audio Evolution Tape Preamplifier

Description, images, technical data and specifications

Doshi Audio Evolution Tape Preamplifier
Image source - (c) Doshi Audio

The Evolution Tape Preamplifier is a tube tape playback preamplifier from Doshi Audio for use with reel-to-reel tape machines. It belongs to the Evolution series, which follows the earlier V3 generation and also includes a line preamplifier, a phono preamplifier, a stereo power amplifier and monoblocks. It comes with its own power supply, and the casework comes in natural or black anodised aluminium.

Key specs that matter

There is one stereo input with both RCA and XLR connectors, and only one of them can be connected at a time. Outputs are two - one direct XLR and one transformer-coupled output in XLR or RCA. Maximum gain is 60 dB and is jumper adjustable. Noise is at least 90 dB below 1 V, unweighted. Output swing is over 80 V p-p before clipping. The tube complement is eight in total, three 12AT7 and one ECC99 per channel. Power consumption is 30 W, and the preamplifier and its power supply together weigh 15.9 kg.

Engineering and use context

Both NAB and IEC playback equalisation are available, each with separate circuitry. Its inputs are differential and balanced. Doshi Audio completely redesigned the power supply for the Evolution version, with high-stability, ultralow-noise B+ regulation by a combined series and shunt regulator, Schottky rectifiers and passive power factor correction. According to Doshi Audio, the circuit changes give lower distortion, greater dynamic linearity and better tube life.

ClarityCap CMR capacitors are used in the circuit. Each tube sits in a machined Teflon socket, and the audio level potentiometers have conductive plastic tracks. A new constrained-layer top plate is part of the Evolution chassis.

Pairing

A reel-to-reel tape deck connects to the stereo input over XLR or RCA. A line preamplifier or integrated amplifier with a balanced input matches the direct XLR output.

Alternatives

Doshi Audio has no other tape playback preamplifier in the Evolution series, which also includes line and phono preamplifiers.

Specifications

  • Model name

    Evolution Tape Preamplifier

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    1

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    60

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    90

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link