Hifiverse

Preamplifiers — PrimaLuna EVO 400-3

Description, images, technical data and specifications

PrimaLuna EVO 400-3
Image source - (c) PrimaLuna

The EVO 400 is the tube preamplifier at the top of PrimaLuna's EVO series, specified in its current version as the EVO 400-3. PrimaLuna belongs to Durob BV of Vlijmen in the Netherlands and builds all its models by hand. In the EVO preamplifier range it sits above the EVO 300.

Key specs that matter

Tube complement is six 12AU7 and two 5AR4. Inputs are three pairs of stereo RCA, two pairs of stereo XLR and one pair of home theater inputs, and outputs are one pair of RCA tape, one pair of stereo RCA and one pair of stereo XLR. Rated output is 2 V per channel, gain is 9.7 dB, and input sensitivity is 650 mV for rated output at maximum volume. Frequency response is 18 Hz - 38 kHz (±1 dB) and 12 Hz - 75 kHz (±3 dB). THD is below 0.5% at 2 V, and S/N ratio is 93 dB (98 dB A-weighted). Input impedance is 220 kohm and output impedance is 256 ohms. Power consumption is 61 W. Dimensions are 405 x 385 x 205 mm (L x W x H), with a net weight of 24 kg.

Engineering and use context

All PrimaLuna preamplifiers are dual-mono. Left and right channels each have a custom-wound, fully encapsulated toroidal power transformer, and two 5AR4 rectifier tubes are used in the high-voltage supply. PrimaLuna's AC Offset Killer circuit lowers transformer noise. Input selection is done by sealed relays mounted at the rear of the chassis. Volume is set by a motorised ALPS Blue Velvet potentiometer, and a heavy metal full-function remote is supplied.

Inside, the point-to-point wiring is Swiss-made, silver-plated OCC copper with a Teflon dielectric. Capacitors are Nichicon and DuRoch polypropylene and tinfoil types, resistors are Takman parts from Japan, and every tube socket is ceramic. RCA and XLR jacks are gold-plated and panel-mounted. Its heavy-gauge, fully vented steel chassis has a five-coat finish, with each coat hand-rubbed and polished.

SoftStart reduces the chance of tube failure from thermal shock at switch-on. With PTP (Power Transformer Protection), an internal thermal switch opens the primary circuit when the power transformer overheats, and contact is restored once it has cooled. An aluminium screw on the AC input marks the live side of the connector. EVO models also have a fully shielded phonostage box connected to the bottom plate for the optional internal PhonoLogue circuit.

Pairing

Power amplifiers with balanced XLR or single-ended RCA inputs connect directly. A surround processor connects through the home theater input. The optional PhonoLogue EVO board accepts MM and high-output MC cartridges.

Alternatives

The EVO 300 is the PrimaLuna tube preamplifier one step below in the EVO series.

Specifications

  • Model name

    EVO 400-3

  • Analog inputs (balanced)

    2

  • Analog inputs (single-ended)

    3

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    1

  • Gain (dBu)

    9.7

  • Input sensitivity (mV)

    650

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    220 000

  • Input impedance (single-ended) (Ω)

    220 000

  • Output impedance (balanced) (Ω)

    256

  • Output impedance (single-ended) (Ω)

    256

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    12

  • Frequency response high +/- 3dB (Hz)

    75 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    93

  • Total Harmonic Distortion + Noise (THD+N) (%)

    <0.5

  • Dimensions (mm)

    405 x 385 x 205

  • Weight (kg)

    24

  • Official link