The Caspian 4G Streaming Pre-Amplifier is the control unit of the Caspian Series 4G from Roksan, a company that started in London in 1985. It was announced on 26 January 2026 together with the Caspian 4G Power Amplifier, at GBP 3,500, USD 4,500 or EUR 4,000, and is hand-built at the Monitor Audio Group headquarters in Rayleigh, Essex.
Key specs that matter
Analogue inputs are one balanced XLR pair, two RCA pairs, an MM phono input and an MC phono input. Digital inputs are two coaxial and two optical up to 24-bit/192 kHz, Bluetooth with SBC, aptX and AAC, HDMI eARC and BluOS streaming. Outputs are one XLR pair and two RCA pairs, plus a low-pass filtered subwoofer output. On the XLR and first RCA outputs, THD+N is below 0.0008% and signal-to-noise ratio is above 108 dB (3.9 Vrms, A-weighted), with a maximum output level of 3.9 Vrms. MM phono gain is 53 dB, adjustable by 6 dB either way, with an MM input impedance of 47 kohms/100 pF. Dimensions are 93 x 432 x 378 mm (H x W x D) and weight is 10.1 kg.
Engineering and use context
Conversion uses Roksan's Rapture DAC in a dual mono balanced layout with LVDS signal transfer. Rapture is a discrete, differential current-conveyor topology that Roksan uses instead of op-amp ICs. Its analogue pre-amplifier section is fully balanced, and volume is set by a hybrid digital-analogue control with channel matching within 0.25 dB. A ground switching input design minimises crosstalk between connected sources, and multiple dedicated power supplies are used. The phono stage has calibrated RIAA equalisation.
BluOS network streaming covers up to 64 zones at up to 24-bit/192 kHz, with Roon Ready certification, AirPlay, Spotify Connect, Tidal Connect and MQA support. Gigabit Ethernet, Wi-Fi 5, a USB Type-A port for memory sticks, a 12 V trigger and a wired IR input are on the rear panel. Internal custom-built antennas have reflectors to protect sensitive circuits from interference. The front carries an OLED display with customisable input icons and a Dynamic Control Dial with haptic feedback. Setup and firmware updates go through the MaestroUnite app, and a 15-button IR remote in an extruded aluminium case is supplied. Finishes are silver and black, with a five-year warranty.
Pairing
The matching power amplifier is the Caspian 4G Power Amplifier, connected over balanced XLR. Other power amplifiers can be driven from the XLR or RCA outputs. The subwoofer output connects to a powered subwoofer, and HDMI eARC connects to a television.
Alternatives
Roksan earlier offered the Caspian Pre-Amplifier from the Caspian M Series, a line preamplifier of the previous generation.