The C12000 is a 2-channel Hybrid Drive preamplifier from McIntosh Laboratory with both vacuum tube and solid-state outputs. McIntosh calls it the next generation of its two-chassis preamplifier design, in which the audio section is separated from the control and power sections. It consists of the C12000 Controller (C12000C) and the C12000 Preamplifier module (C12000ST), joined by a pair of shielded umbilical cables.
Key specs that matter
There are 12 analog inputs - six balanced, four unbalanced and two unbalanced phono inputs, each configurable for MC or MM. Outputs are one balanced tube, one balanced solid-state, one fixed unbalanced and one programmable unbalanced, plus a 6.35 mm High Drive headphone output. High-level gain is 15 dB, sensitivity 900 mV balanced and 450 mV unbalanced, input impedance 50 kohms and 25 kohms, maximum output 20 V RMS and 10 V RMS, THD 0.005% and signal-to-noise ratio 107 dB. Phono gain is 58 - 64 dB (MC) and 40 - 46 dB (MM), sensitivity 0.25 - 2.5 mV (MC) and 5 - 10 mV (MM), signal-to-noise ratio 79 dB (MC) and 83 dB (MM), and THD 0.05%. Frequency response is 20 Hz - 20 kHz (+0, -0.5 dB) and 10 Hz - 100 kHz (+0, -3 dB). Each module measures 444.5 x 152.4 x 457 mm (W x H x D). The C12000C weighs 12.3 kg, the C12000ST 11.3 kg, and power consumption is 75 W.
Engineering and use context
All power control, data ports and external control connections are in the Controller, together with dual isolated power supplies for the left and right channels and a dual microprocessor. Audio connections and circuitry are in the Preamplifier module. In each chassis the channels are electrically and mechanically isolated for dual mono operation.
For the tube output, the high-level section uses six tubes, two 12AT7 and one 12AX7A per channel. Solid-state output is via a discrete balanced op-amp, and all outputs are driven by discrete amplifiers. The phono stage uses four 12AX7A tubes, two per channel, in a fully balanced configuration with RIAA equalisation. Both phono inputs have adjustable capacitance and resistance loading and gain in 6 dB steps.
Further features are the Headphone Crossfeed Director (HXD), Home Theater Pass Through and input level matching of ±6 dB. Both chassis are mirror-polished stainless steel with hairline brushed black Titanium stainless steel, and only the C12000ST has output meters.
Pairing
A power amplifier with balanced or unbalanced inputs is required. The two balanced variable outputs allow two power amplifiers to be connected. MC and MM cartridges connect directly to the phono inputs. There is no direct interface to the McIntosh D1100 Digital Preamplifier.
Alternatives
The McIntosh C2800 is a 2-channel vacuum tube preamplifier with 16 analog and digital inputs and a DA2 Digital Audio Module.